Seral Port (Star Serial Port Emulator) - Star Micronics TSP100IIIU Software Manual

4.9. Seral Port (Star Serial Port Emulator)

This function generates a virtual serial port (COM port).
Using this function allows you to use the TSP100ECO/TSP100IIIU with the USB interface equipped , the
TSP100IIIW/TSP100IIILAN with the Ethernet interface equipped and theTSP100IIIBI with the Bluetooth
interface equipped using applications for a serial printer.
Print data must be sent to a virtual serial port on a one-document basis. If print data is divided into many
parts for sending, the print speed will slow down compared to when sending on a one-document basis. This
specification has been changed from version 5.0.
To use an ETB command in a virtual serial port, set "Automatic Retry" to "Disabled" in General Settings.
For more information, refer to "4.3.2 General Settings".
When activated in the Star Line mode, the port created by clicking "Add Port" is registered as
a port in the Star Line mode. When activated in the ESC/POS mode, the port created by
clicking "Add Port" is registered as a port in the ESC/POS mode.
132
Software Manual