Communication - ABB SCU200 User Manual

• UI aspect ithems
In this section it is possible to change the appearance of the WebUI - you can set a light or dark theme

6.7.2.Communication

• IP
The following information have to be set to correctly have access to the user interface via IP:
DHCP or static (Note: With DHCP you can find and define an IP
IP Mode address via the router by MAC address or device/host name -
scu200hs) The fallback IP address is: https://192.168.1.200:8000
Current IP address of device or possibility to define a new IP
IP Address
address
Subnet Mask
Current Subnet Mask or possibility to define another Subnet Mask
Gateway
Current Gateway or possibility to define another Gateway Address
Host name scu200hs or possibility to define another Host Name
MAC Address Shows the MAC Address of the device
Apply
By clicking the Apply pushbutton changes are stored
Inappropriate settings may cause the user interface to become inaccessible. In order to be able to restore
device access to the fallback IP, please use the reset button.
SCU200 INSITE ENERGY MANAGEMENT SYSTEM 65