Field Settings - Daikin FDYA160AV1 Installation Manual

Field Settings

How to Change the Field Settings with the Wired Remote Controller
The following functions of indoor unit can be changed from the remote controller. At the item of installation or
after service inspection / repair, make the local setting in accordance with the following description.
Wrong setting may cause malfunction.
• Setting indoor fan target speed
• Setting air filter sign
• Setting temperature sensor location
• Indoor fan setting during heating thermo-off
• Indoor fan setting during cooling thermo-off
• Indoor fan setting during heating/cooling
(When optional accessory is mounted on the indoor unit, setting for the indoor unit may be required to change.
Refer to information in the option handbook.)
Wired Remote Controller <BRC1E63>
-1
Press and hold the Cancel button
for 4 seconds or longer.
Service Settings menu is
displayed.
-2
Select Field settings
Service Settings menu, and
press Menu/Enter button.
Field settings screen is
displayed.
-3
Highlight the Mode No., and
select desired "Mode No." by
using "
For the commonly-used field
setting item, refer to page 14
and 15.
-4
In the case of setting per indoor
unit during group control (When
Mode No. such as
22 , 23 , 25
"Indoor unit No." to be set by
using "
(In case of group setting, this
operation is not needed.)
In case of individual setting
per indoor unit, current settings
are displayed. And, SECOND
CODE NO. " - " means no
function.
-5
Highlight SECOND CODE NO. of
the FIRST CONE NO. to be
changed, and select desired
"SECOND CODE NO." by using
" " (Down/Up) button.
Multiple identical mode number
settings are available.
In case of group setting, all of
SECOND CODE NO. which may
be set are displayed as " * ".
" * " is changed to SECOND
CODE NO. to be set.
And, SECOND CODE NO. " - "
means no function.
Ducted Air Conditioners
in the
" (Down/Up) button.
20 , 21 ,
are selected),
" (Down/Up) button.
• Setting for T1, T2 input
• Setting for thermostat differential
• Setting for thermostat sensor in remote
• Setting for permission level
• Setting for home leave function
Installation Manual
14