Related Manuals for haupa SHs-6M
Summary of Contents for haupa SHs-6M
- Page 1 Battery powered crimping tool SMART-LINE INSTRUCTION MANUAL Battery powered crimping tool „SHs-6M“ Art. 215770/M-1 Video 215770/M … convincing solutions...
-
Page 2: Technical Data
1. Technical data Area of application: For the creation of an electrical connection by means of compression Scope of delivery: 1 crimping tool, 1 charger, 1 battery, 1 carry loop, in SysCon box, without pressing dies. Pressing force: 60 kN Safety: The tool is fitted with a safety value that has been set at the factory. - Page 3 The instructions must have been read and understood by the user. The operator must ensure that this is the case. … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
- Page 4 Pushbutton for return movement Operating: Pushbutton Die holder to advance • Select the required pressing die. • Never use a crimping tool without pressing dies! • The pressing procedure can be stopped at any time by releasing the actuation switch. •...
- Page 5 92 mm (L) x 47 mm (B) x 45 mm (H) Charger: Connecting battery to charger: ... convincing solutions HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid, Tel.: +49 (0) 2191 8418-0. Fax: +49 (0) 2191 8418840, E-Mail: sales@haupa.com. Subject to technical changes and printing errors.
- Page 6 Charging Time: approx. 60 Min Capacity: 4 Ah LED charge indicator: (Pressing the button will light up LEDs) HAUPA is not liable for wrong or unintended use Please remove the battery after use and keep it removed when storing the tool!
-
Page 7: Care And Maintenance
WITH EVERY REPLACEMENT PART ORDER, INCLUDE THE FOLLOWING INFORMATION: 1) Article number. 2) Article description. 3) Reference to the operating instructions and/or date. 4) Tool type. 5) Serial number of the tool. The guarantee is voided if you use parts that are not original replacement parts from HAUPA. -
Page 8: Ec Declaration Of Conformity
216663/M; 216667; 216667/M; 216669; 216669/M Note: A correct connection according VDE 0220 Part 2 is only guaranteed if the user work with Haupa cable lugs and also adequate HAUPA pressing tools. The tools are not isolated and it is forbidden to work under tension.