Page 2
SPECIFICATION MODEL NO. 216760-1 OUTPUT 6 TON VOLTAGE DC 18V PRESSURE 700 KG/CM WEIGHT 2.4 KGS (WITHOUT BATTERY) DIMENSION 116mm(L)x75mm(W)x334mm(H) CHARGING TIME 60-70 MINUTES(215525)/30 MINUTES(215523) ACCESSORY CHARGER/BATTERY SET & SYSCON ⚫ FEATURES Quick-exchange design for head ⚫ LED working light design ⚫...
Page 4
REMARKS BEFORE OPERATION OR WHILE OPERATING u Please wear protective equipment while operating to make sure your safety. Warning: This tool & heads are not insulated. u Please kindly check the crimping/cutting/punching range and suitable crimping/cutting/punching materials before any action. (You could find the range at this manual page 1) Do not crimp/cut/punch without any material in working area, otherwise the tool will be damaged.
Page 5
HOW TO OPERATE/USE 18V BATTERY CHARGER 215527 THIS CHARGER COULD WORK WITH 18V LI-ION BATTERY: 215523 & 215525 SPECIFICATION MODEL NO. 215527 INPUT VOLTAGE 100 – 240 V AC FREQUENCY 50 / 60 Hz OUTPUT VOLTAGE 21 V DC OUTPUT CURRENT 1,5 A WEIGHT 0.126 KG...
ABOUT THE 18V LI-ION BATTERY: 215523 & 215525 215523 (2 Ah) SPECIFICATION MODEL NO. 215523 VOLTAGE 18 V DC WEIGHT 0.35 KG DIMENSION 114 mm(L) x 73,5 mm (W) x 67 mm CHARGING TIME ~ 30 MINUTES CAPACITY 2 Ah 215525 (4 Ah) SPECIFICATION MODEL NO.
MANUAL/INSTRUCTION OF BATTERY BEFORE OPERATION PLEASE NOTE Do not put the battery together with any metal. Otherwise the battery may have a short circuit. Do not store the battery at a wet/hot space. Put battery in a dry clean space. Do not give the battery to children.
Page 8
HOW TO OPERATE/USE THE BATTERY TOOLS SET *Operation Steps u Insert the battery to art. 216760 as below picture 1: *While the battery is inserted, the battery lock will lock the battery. *While the tool connects the battery successfully and press the ON start button, the “LED working light”...
Page 9
HOW TO EXCHANGE DIFFERENT APPLICATION HEADS u Set 216763 dieless crimping head like below steps: Ø Pull both fixed pins on T-Bar and insert art. 216763 dieless crimping head like below picture 3: *After inserting head, please press oil-release button to ensure the ram back to the original position, i.e. Max.
Page 10
Ø Pull both fixed pins on T-Bar and insert art. 216761 crimping head like below picture 6: *After inserting head, please press oil-release button to ensure the ram back to the original position, i.e. Max. Opening, then you could put crimping material inside. Picture 6: Insert art.
Page 11
Ø Pull both fixed pins on T-Bar and insert art. 216762 cutter head like below picture 9: *After inserting head, please press oil-release button to ensure the ram back to the original position, i.e. Max. Opening, then you could put cutting material inside. Picture 9: Insert art.
Page 12
Ø Pull both fixed pins on T-Bar and insert art. 216764 punch head like below picture 12: *After inserting head, please press oil-release button to ensure the ram back to the original position, i.e. Max. Opening, then you could put punching material inside. Picture 12: Insert art.
Page 13
u Set crimping head (art. nr. 216666-U) like below steps: Ø Pull both fixed pins on T-Bar and insert crimping head like below picture 15: Picture 15: Opening & closing of crimping head Ø Press fixed pin down. Ø Rotate fixed pin as above pictures and pin will be out automatically. Ø...
Page 14
STORAGE u The hydraulic oil for the body: Add/use hydraulic oil Shell Tellus T15/HV 15. Do not use other brand. Otherwise the tool will be damaged. u Storage Put the tool, charger and battery in a dry clean place. Please charge the battery full once a month to make sure the life time.
Page 15
Universal hydraulic tool with exchangeable heads for multiple applications (Crimping-Cutting) We, HAUPA GmbH & Co KG, Headquatered in 42853 Remscheid/Germany, Koenigstrasse 165-169, declare under our sole responsibility that the products mentioned in the data sheet comply with the...