1. Technical data Area of application: For the creation of an electrical connection by means of compression Scope of delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry strap, in a plastic case, without dies. Pressing force: 120 kN Oil type: ISO class viscosity 15 Feed rate:...
Page 3
• The dies are inserted via the guides until they come to a stop at the blocking pin. Die holder Pushbutton Pushbutton for to advance return movement … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Page 4
Operating: • When inserting into the piston, you must only ensure that this is pushed far enough forward for the release button to be visible and accessible. • To remove the dies, in both instances, the relevant release button must be activated. Then allow the dies to slide out.
Page 5
Check to see whether the switch on the machine automatically pops out again when you release it. … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Page 6
VESTA HLP-15 from VERKOL or an oil of a similar quality. Remove the tank lid and top up the oil. The oil must be filtered first. If necessary, purchase the required oil from the HAUPA service cen- tre (Art. 216254).
Do not attempt to force the head to turn when the hydraulic circuit is pressurised Guarantee: 2 year guarantee when used for the purpose it is intended when the annual maintenance inter- vals are maintained by an authorised HAUPA service centre. We reserve the right to rework the product. Disposal: Individual components must be disposed off separately.
Page 8
3) Reference to the operating instructions and/or date. 4) Tool type. 5) Serial number of the tool. The guarantee is voided if you use parts that are not original replacement parts from HAUPA. Spare parts list art. 216601 Decription Decription...
216622 Spare parts list art. Decription Decription Decription PLASTIC BOX (L) O RING BEARING PLASTIC BOX (R) OIL RERSERVOIR BEARING BASE UP PLASTIC CAP OIL RESERVOIR PLUG FIRST GEAR BASE BATTERY 14.4V SNAP RING FIRST GEAR PART PUMP BODY SPRING FIEXED PIECE RING GEAR SCREW SPRING...