1. Technical data Area of application: For the creation of an electrical connection by means of compression Scope of delivery: 1 crimping tool, 1 charger, 1 battery, 1 carry loop, in plastic case, without pressing dies. Pressing force: 60 kN Oil type: ISO class viscosity 15 Safety:...
Page 3
Pushbutton to advance Thorn pressing Pushbutton for return movement … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Page 4
3. Notes regarding correct use Before you start work, all active, thus current-carrying elements in the area around the assembler must be switched to without power. If this is not possible, protective procedures for working in the vicinity of components under current must be implemented. The charge status of the battery should be checked before you start work 3.1.
92 mm (L) x 47 mm (B) x 45 mm (H) Charger: Connecting battery to charger: ... convincing solutions HAUPA GmbH & Co. KG, Königstraße 165-169, D-42853 Remscheid, Tel.: +49 (0) 2191 8418-0. Fax: +49 (0) 2191 8418840, E-Mail: sales@haupa.com. Subject to technical changes and printing errors.
Page 6
Charging Time: approx. 60 Min Capacity: 4 Ah LED charge indicator: (Pressing the button will light up LEDs) HAUPA is not liable for wrong or unintended use Please remove the battery after use and keep it removed when storing the tool!
WITH EVERY REPLACEMENT PART ORDER, INCLUDE THE FOLLOWING INFORMATION: 1) Article number. 2) Article description. 3) Reference to the operating instructions and/or date. 4) Tool type. 5) Serial number of the tool. The guarantee is voided if you use parts that are not original replacement parts from HAUPA.
Page 11
HAUPA pressing tools. The tools are not isolated and it i s forbidden to work under tension. HAUPA GmbH & Co.KG, Königstr. 169, 42853 Remscheid, Germany Phone +49 2191 8418 – 0, Fax +49 2 191 8418 – 840...