1. Technical data Area of application: For the creation of an electrical connection by means of compression Scope of delivery: 1 crimping tool, 1 charger, 2 batteries, 1 carry loop, in plastic case, without pressing dies. Pressing force: 60kN Oil type: ISO class viscosity 15 Safety: The tool is fitted with a safety value that has been set at the factory.
Page 3
The instructions must have been read and understood by the user. The operator must ensure that this is the case. … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Pushbutton to advance Operating: Die holder Pushbutton for return movement • Select the required pressing die. • Never use a crimping tool without pressing dies! • The pressing procedure can be stopped at any time by releasing the actuation switch. •...
To prevent damage to the tool as a result of bumps, dust etc. you should if possible store the tools in the original packaging. … convincing solutions Germany: HAUPA GmbH & Co. KG, Königstraße 165-169, D - 42853 Remscheid. Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, sales@haupa.com • Errors and technical changes reserved.
Page 6
Guarantee: 2 year guarantee when used for the purpose it is intended when the annual maintenance inter- vals are maintained by an authorised HAUPA service centre. We reserve the right to rework the product. Faults: Loss of oil: Send to the HAUPA service centre. Do not open! Very slow feed of the piston: Air is in the hydraulic system.
Page 7
3) Reference to the operating instructions and/or date. 4) Tool type. 5) Serial number of the tool. The guarantee is voided if you use parts that are not original replacement parts from HAUPA. Replacement parts list art. 215881 Description Description...