Connecting The Rm-Br300 Remote Control Unit; Connector Plug - Sony BRC-Z700 Operating Instructions Manual

Connecting the RM-BR300 Remote
Control Unit
Use the RS-232C connecting cable supplied with the
Remote Control Unit.
1 2 3 4 5 6 7 8 9
VISCA RS-422
IN VISCA RS-232C OUT
VISCA RS-232C IN
VISCA RS-232C
RM-BR300 Remote Control Unit
* supplied with the RM-BR300
Note
When using the VISCA RS-232C connectors, check that
the BOTTOM switch on the bottom of the camera
(page 19) and the DIP switch on the bottom of the
Remote Control Unit (page 23) are set to RS-232C.
62
Connections
OFF ON IR SELECT
DATA MIX 1 2 3
OFF ON
75
RGB/COMPONENT
DC IN 12V
EXT SYNC IN VIDEO S VIDEO
to AC outlet
RS-232C cable*
DC IN 12V
AC power cord*
to AC outlet
AC power adaptor*
To connect the Remote Control Unit
using the VISCA RS-422 connectors
You can use the VISCA RS-422 connectors to connect
the RM-BR300 Remote Control Unit to the camera
instead of the VISCA RS-232C connectors. Use of the
VISCA RS-422 connectors allows the connection up to
1,200 m (3,937 feet) away.
Prepare the connecting cable using the RS-422
connector plugs that come with the camera and the
Remote Control Unit.
For making the cable, refer to the pin assignments of the
VISCA RS-422 connector (pages 86 and 87) and the
wiring diagram of VISCA RS-422 connection
(page 89).
For the use of the RS-422 connector plugs, see page 90.
1 2 3 4 5 6 7 8 9
OFF
VISCA RS-422 OFF
IN VISCA RS-232C OUT EXT SYNC IN
RM-BR300 Remote Control Unit
Notes
• When using the VISCA RS-422 connectors, check
that the BOTTOM switch on the bottom of the camera
(page 19) and the DIP switch on the bottom of the
Remote Control Unit (page 23) are set to RS-422.
• When the connections using the VISCA RS-422
connectors are made, the VISCA RS-232C connection
is not available.
IR SELECT
ON
1 2 3
DATA MIX
ON
75
RGB/COMPONENT
DC IN 12V
VIDEO S VIDEO
to AC outlet
VISCA RS-422
VISCA RS-422 cable
VISCA RS-422
to AC outlet