Connecting To A Remote Control Unit - Sony DXC-990P Instructions For Use Manual

Connecting to a Remote Control Unit

VIDEO OUT T
DXC-990P
MENU BLACK
TRIG IN
FILE
BARS
SELECT WHITE
ENTER
RGB/SYNC
LENS MENU LOCK
ON
OFF
VIDEO OUT
DC IN/ GEN LOCK
REMOTE
VBS
REMOTE
DC IN/
VBS T
* CMA-D2CE is intended for general purpose use. It is not intended for medical use.
Operating the Camera with the RM-C950 Remote Control Unit
The functions of the following buttons and control on the Remote Control Unit
change as follows, in accordance with the functions of the camera.
Buttons/ Button/control
control on names when
the RM-C950 used with the
camera
PRINT ENTER
FLASH FILE SELECT
LONG SHUTTER SPEED Use to set the shutter speed without displaying the menu
EXPOSURE
J j
2
GAIN GAIN
J
FUNCTION BLACK
The sheet for the button names when the camera is used with the remote
control unit is supplied with the camera. Attach the name sheet to the control
panel of the RM-C950.
75-ohm coaxial cable
RM-C950
remote control unit
Camera cable
(supplied with RM-C950)
CCDC cable: CAMERA (4-pin)
CCXC cable: CAMERA (12-pin)
CCDC-5/10/25/50A/100A cable or
CCXC-12P02N/05N/10N/25N cable
Function
Use when displaying the setting menu selected in the
MAIN menu, or use to set the AE window, etc. manually
in the menus.
Use to switch a preset file between A and B.
when SHUTTER is set to STEP or VARIABLE in the
menu.
Use to change the variable range of gain levels.
Use to start the auto black balance adjustment.
Video input
connector
1
Set the MODE selector
CAMERA
to the [1] position.
2
CMA-D2CE*/
D2MDCE
camera adaptor
Equipotential ground
terminal (only for CMA-
D2MDCE)
Video monitor,
VCR, etc.
Power
cord
37
Connections