Sony BRC-Z700 Operating Instructions Manual page 59

4
Attach the ceiling bracket (B) to a shelf, etc. on
which the camera is to be installed.
Use four screws (not supplied) appropriate for the
materials of the shelf, etc.
Align the f hole on the ceiling bracket (B) in the
direction where the front of the camera will be
positioned later.
Wall
f hole
Shelf, etc.
Screws (4)
Ceiling
bracket (B)
Hole for
connecting cables
5
Attach the other end of the wire rope to the material
near the shelf, etc.
Use an M5 (3/16 inch) hexagon socket head cap
screw (not supplied). Attach the wire rope to the
material independent of the shelf, etc. where the
ceiling bracket (B) is attached.
M5 (3/16 inch) hexagon socket
head cap screw
Wire rope
(supplied)
59
Installation