Control Panel Overview - Olympia OM 9812 Operating Instructions Manual

Control Panel Overview

27
28
1
light — Glows when the machine is in the Copy mode.
COPY
2
light — Glows when the machine is in the Fax mode.
FAX
3
light — Glows when a problem occurs during fax communication,
ALARM
printing or scanning. The light stays on until the machine prints a Check
Message report.
4
. light — Glows when the machine is communicating with another
COMM
machine.
5
light — Glows when the machine is receiving an incoming
MEMORY RECEIVE
fax document into its electronic memory.
6
Soft Keys — Shortcut keys. Any function that can be turned on or off can be
programmed into these three keys. If the light above one of these keys glows,
this indicates the setting that's been programmed into it (see page 3.17) is
turned on. These keys are programmed at the factory to turn the following
functions on or off:
Soft key 1: — Press to turn the energy saving mode on or off.
ENERGY SAVING
Soft key 2: — Press to turn the security reception on or off.
SECURITY
Soft key 3:
MEMORY TRANSMIT
machine uses, whether Memory transmission or Real time transmission (see
page 2.3).
1 2 3 4 5
26 25 24 23
— Selects which transmission mode your fax
6 7 8
22 21 20 19 18
7
/
REDIAL PAUSE
also produces a special pause character which can be useful when dialling
long-distance numbers.
8
DIALING OPTIONS
bers (see page 3.1).
9
BROADCAST
more than one location).
10
— Press this to set up a fax transmission to a call group, a set of fax
GROUP
numbers which will receive the same document in one fax operation.
11
ADVANCED FUNCTIONS
In Fax mode: Chooses from following several fax options – delayed transmis-
sion, Polling, F-Code transmission, F-Code polling and Batch transmission.
Or, in Copy mode: Chooses from following copy options – Nega/Posi copy,
Combine copy (only for OM 9816) or Ultra copy (only for OM 9816).
12
REVIEW COMMANDS
brief description of delayed commands.
13
— Press to begin a fax transmission, reception or copying.
START
14
— Stops the current operation and ejects a document from the
STOP
15
COPY RESET
defaults.
9 10 11 12
17 16 15
— Redials the last number you dialed. In certain operations, it
— Press this to insert special symbols into telephone num-
— Press to send a broadcast fax (sending the same document to
—
— Press to review pending fax commands or to view a
— Use in copy mode only. Press to reset the copy settings to their
Getting started
13 14
.
ADF
1.3