Download Print this page

Graco LSA 200 Instructions-Parts List Manual page 3

Low shear agitators

Advertisement

EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction or start unexpectedly and result
in serious injury.
D This equipment is for professional use only.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use the equipment only for its intended purpose. If you are uncertain about the usage, call Graco
Technical Assistance at (313) 416–3400.
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
D Check the equipment daily. Repair or replace any worn or damaged parts immediately.
D Do not exceed the power supply requirement of the electrical equipment.
D For air-powered and hydraulic-powered agitators, the Maximum Input Pressure depends on the
model type – refer to the Technical Data section on page 23. Never exceed these pressures.
D Be sure that all accessories on the system's air and/or hydraulic power lines are rated to with-
stand the system pressure. Never exceed the maximum working pressure of the lowest-rated
component in your system.
D Do not move or lift any pressurized equipment.
D Use fluids or solvents that are compatible with equipment wetted parts. See the Technical Data
section of all equipment manuals. Read the fluid and solvent manufacturer 's warnings.
D The fluid hoses must have spring guards on both ends to protect them from rupture caused by
kinks or bends at or close to the couplings.
D Comply with all applicable local, state and national fire, electrical and other safety regulations.
ELECTRIC SHOCK HAZARD
Beware of HIGH VOLTAGE in systems with electrical equipment. CONTACT WITH HIGH VOLT-
AGE ELECTRICITY CAN BE FATAL!
D Be sure all electrical installations and service is performed by a qualified electrician only.
D Be sure electrical installations comply with applicable codes.
D Be sure power is disconnected when servicing and repairing equipment.
Symbols
Be sure you read and understand each of these terms
before reading the rest of the manual.
NOTE: Gives additional information or helpful hints.
WARNING
WARNING
Warning Symbol
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
CAUTION
310500
3

Advertisement

loading

This manual is also suitable for:

Lsa 200hLsa 220Lsa 220hLsa 300Lsa 300h