Stairville Outdoor Stage Par Pro 12x8W QCL MKII User Manual page 24

Operating
DMX mode
Outdoor Stage Par Pro 12 × 8W QCL MKII
24
LED PAR
Press [Mode] repeatedly until the display shows 'd.xxx' . Now you can set the number of the
first DMX channel to be used by the device (DMX address). Use [Up] and [Down] to select a
value between 1 and 512 (the display shows 'd.001' ... 'd.510' ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode
1-channel
4-channel
5-channel
7-channel
Confirm with [Setup]. With [Up] and [Down] you can now select one of the following DMX oper‐
ating modes:
'1-ch' (one channel)
n
n '4-ch' (four channels)
'5-ch' (five channels)
n
'7-ch' (seven channels)
n
This setting is only relevant when the device is controlled via DMX. When the display shows
the desired value press [Setup] to confirm the selection and return to the parent menu.
Highest possible DMX address
512
509
508
506