Installation
DESCRIPTION
Discharge Deflector Assembly
Deck Drive Belt
Operator's Manual
Parts Catalog
Install Deflector Baffle
1.
Hold deflector baffle in position along front of
deflector, with large end toward the mower
(Fig. 1).
2.
Line up inside edge with deflector edge and
space so it extends below as shown (Fig. 1).
3.
Mark and drill (2) 9 mm holes in deflector
(Fig. 1).
4.
Secure with 5/16–18 x 3/4 (9mm) bolts and thin
5/16 lock nuts (Fig. 1).
1
16 mm
2
2041
Figure 1
1. Grass deflector
2. Deflector baffle
4
3
4
37 mm
3. Bolt 5/16–18 x 3/4" (9 mm)
4. Lock nut 5/16" thin
QTY.
1
Install for side-discharge cutting
1
Install on cutting unit and traction unit
1
Read before operating
1
Ordering parts
USE