Using The Shaver - Philips SP9883/36 Manual

English

Using the shaver

SP9883_EN_A6_cc2020_0302.indd 37 SP9883_EN_A6_cc2020_0302.indd 37
Place the shaver on the cross mark of the wireless Qi
charging pad. Make sure the shaver fits into the cavity
of the wireless Qi charging pad.
Only charge the shaver on the provided wireless Qi
charging pad.
- The wireless Qi charging pad beeps and the ring on
the pad lights up when the shaver is correctly placed
and connected for charging.
-
When the shaver is charging, the ring on the pad
lights up and the battery charge indicator on the
shaver flashes white. The battery charge is indicated
by the battery charge percentage flashing on the
display, which is shown when the shaver is moved.
3 When the battery is fully charged, the battery charge
indicator and the ring on the pad light up white
continuously. Both lights switch off automatically
after 15 minutes.
Always check the shaver and all accessories before
use. Do not use the shaver or any accessory if it is
damaged, as this may cause injury. Always replace a
damaged part with one of the original type.
This symbol indicates that the shaver can be used in the
bath or shower.
- Use this shaver for its intended household use as
described in this manual.
- For hygienic reasons, the shaver should only be used
by one person.
- Trimming is easier when the skin and hair are dry.
Note: This shaver is waterproof. It is suitable for use in the
bath or shower and for cleaning under the tap. For safety
reasons, the shaver can only be used without cord.
37
2023/03/02 18:19 2023/03/02 18:19