Philips SP9883/36 Manual page 55

Problem
The appliance
does not shave as
well as it used to.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
A shaving unit
symbol has suddenly
appeared on the
display.
The notification
symbol flashes and
the shaver beeps
while the shaver is
charging.
SP9883_EN_A6_cc2020_0302.indd 54 SP9883_EN_A6_cc2020_0302.indd 54
Possible cause
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged to
such an extent that the
motor cannot run.
The shaving heads are
damaged or worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset the
appliance.
This symbol reminds
you to replace the
shaving heads.
The appliance is
overheated.
54
Solution
Recharge the battery (see
'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace them.
Replace the shaving heads
(see 'Replacement').
Clean the shaving heads
in the regular way or clean
them thoroughly.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
Replace the shaving heads
(see 'Replacement').
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the shaver
has decreased to the normal
level after approx. 10
minutes.
English
2023/03/02 18:19 2023/03/02 18:19