Brake Arm Assembly - Hydro-Gear ZT-3600 Service And Repair Manual

ZT-2800 /ZT-3100
®
(Code 3/5/6/7)
Character #7 in the model number code is
3, 5, 6 or 7.
Example: ZX-XXXX-3XXX-XXXX
Refer to Figure 13
Disassembly
1. Mark the position of the brake arm (102) in
relation to the brake shaft (101).
NOTE: The orientation of the brake arm and
brake shaft to one another is very im-
portant.
2. Remove the retaining clip (103).
3. Remove the brake arm (102).
Brake Arm (102)
Brake Shaft (101)
18
/ZT-3200 /ZT-3400
® TM
Reference Mark
Brake Shaft (101)
102
103
Figure 13, Parking Brake

BRAKE ARM ASSEMBLY

®
Inspection
1. Inspect all parts for excessive wear or dam-
age. Replace if necessary.
2. Inspect the splines on the brake arm and
brake shaft.
Assembly
1. Reassemble all parts in the reverse order
of disassembly.
ZT-2800 /ZT-3100 /ZT-3200 /ZT-3400
® ® TM ®