Samsung VS25C97 Series User Manual page 28

Maintenance
Slim LED Brush+
1
4
CAUTION
• Do not clean the brush with water.
• When foreign matter remains on the brush, remove it with a wet tissue or a dry cloth.
NOTE
• If the spin brush does not work after cleaning the Slim LED Brush+, the overheating prevention device
of the motor may have been enabled. Wait 30 minutes or more to cool the motor before operating it
again.
• When removing residual debris with a wet tissue, rub the spin brush gently to avoid compressing it.
- To prevent the bristles on the spin brush from being compressed and causing unwanted vibration,
dry the spin brush vertically on the floor.
• Properly insert the spin brush to its slot.
28 English
2
5
'Click'
3