Samsung VS25C97 Series User Manual page 20

Operation
Alert messages and what to do
The vacuum cleaner displays alert messages for user to inspect certain parts or clean certain parts such as
a filter. Also, its self-diagnosis feature provides a guide that helps you maintain its best performance.
Message
Object stuck in brush/tool
Check if clogged
Filter not inserted
Clean Micro filter
Use compatiable battery
Close the dustbin
Dust bag of Clean Station is
full. Replace it
Connect floor brush to run
diagnosis
Self-diagnosis messages and what to do
Message
Check micro filter or dustbin
Check if brush or pipe is
clogged
Check debris inside the spin
brush
20 English
Check if the foreign matters are stuck in the brush or tool.
Check if the brush, pipe, Washable Micro Filter or Fine Dust Filter is
clogged with foreign matter.
Check if the Washable Micro Filter is properly assembled.
Alerts and recommends the user to regularly check and wash the
Washable Micro Filter. (Refer to the 'Cleaning the vacuum cleaner'
section.)
Check the model name of the battery and make sure it is compatible.
(VCA-SBTC97, VCA-SBTC97S)
Check the dustbin and close it if it is open.
Replace the dust bag in the Clean Station with a new dust bag.
Attach the Slim LED Brush+ or Active Dual Brush.
Check if the dustbin is open. If the Washable Micro Filter and the dustbin
is contaminated, empty the dustbin and wash them with water.
Check if the brush or pipe is clogged and clean them according to the
instructions on the 'Cleaning the vacuum cleaner' section.
Check if foreign matters are tangled to the spin brush and clean it
according to the instructions on the 'Cleaning the vacuum cleaner'
section.
What to do
What to do