Getting Started; Installing Your Highway - PURE Highway 600P EU Manual

Getting started

Installing your Highway

Before you can start using your Highway, you need to do the following:
1. Connect the microphone to the antenna.
2. Position the antenna in your vehicle.
3. Position the microphone in your vehicle.
4. Connect the antenna to your vehicle's audio system, either with an auxiliary cable or by FM radio.
5. Install the wireless controller.
6. Switch your Highway on for the first time.
To watch a video showing how to install your Highway, search for 'Highway installation' on YouTube.
Vehicle requirements
Fitted audio system with auxiliary (3.5mm) port or FM receiver.
l
Standard 12V negative earth power supply. Your Highway is not suitable for use with a 24V power supply.
l
Getting the best DAB signal
As with FM radio, DAB signal coverage changes depending on your location. As you use the Highway in your vehicle, you may travel
through areas where DAB signal coverage is poor.
To help get the best DAB signal when coverage is poor or there is a weak signal:
Follow the installation instructions carefully.
l
Ensure the magnetic grounding tail is attached to the antenna.
l
Use the supplied 12V power adapter, as other third-party adapters can cause interference.
l
Switch off other devices in your vehicle that aren't in use. Devices such as satellite navigation systems and dashboard cameras
l
can cause interference.
7