Table of Contents
Advertisement
5.11.13 SNMP
You can connect the Device with some software such as MIB Builder and MG-SOFT MIB Browser to
manage and control the Device from the software.
Prerequisites
Install the software that can manage and control the SNMP, such as MIB Builder and MG-SOFT
●
MIB Browser.
Obtain the MIB files that correspond to the current version from the technical support.
●
This function is available on select models.
Procedure
Select Main Menu > NETWORK > SNMP.
Step 1
Step 2
Click
Step 3
Configure the parameters.
Parameter
Version
Figure 5-215 SNMP
to enable the function.
Table 5-64 SNMP parameters
Description
Select the checkbox of SNMP version that you are using.
333
User's Manual
Advertisement
Table of Contents
