Table of Contents
Advertisement
6. Service Procedures
Replacing Control Electronics Components
High Flow Rate Fan
To replace the fan, disconnect the fan by unplugging the connector that is wired to the 24 VDC
power supply. The replacement fan should be reconnected to the same plug and the wires should
be routine in a manner similar to the original fan. The fan is mounted to the Facilities Panel using
four M4x25 FHCS and nylon nuts
79
PreciseFlex 1300/1400 Robot
Part Number: PF10-DI-00010 Rev. A
Copyright © 2023 Brooks Automation, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the PreciseFlex 1300 and is the answer not in the manual?