HP 8559A Operation And Service Manual page 21

GENERAL INFORMATION
Instrument
Display Mainframe
Sweep Oscillator
R F Plug-In
Comb Generator
Spectrum Analyzer
Synchronizer
Performance Test; A
Option H08 extends the frequency range o f the standard HP
(18.6 GHz) may be used if Option
changes input frequency t o
TABLE 1-4. RECOMMENDEDTEST EQUIPMENT(1 OF 4)
Critical Specifications
H P 180 Series with Variable Persistence
Mainframe for R F Plug-Ins below.
External Sweep
Adjustable Sweep range (Marker Sweep)
Compatible with mainframe above.
Output Frequency: 0.01 to 2.4 GHz
Output Amplitude :
FM and Phase Lock
Internal and External leveling
(both crystal detector and power meter)
Compatible with mainframe above.
Output Frequency: 2 t o 21 GHz
Output Amplitude:
+
Band I , 0 t o 10 dBm adjustable
Band 2 , 0 t o + I 0 dBm adjustable
Band 3 , 0 to +3 dBm adjustable
Band 4 , 0 to +3 dBm adjustable
FM and Phase Lock
Internal and External leveling
(both crystal detector and power meter)
Output Frequency: 21.4 MHz and 321.4 MHz
Output Amplitude: - 40 t o 0 dBm adjustable
Output Frequency: 1 Hz to
Output Amplitude: 0 to 15V p-p adjustable
Triangle-Wave Output
1 MHz comb teeth to 3 GHz
100 MHz comb teeth to 21 GHz
Frequency Range: 2 0 MHz to 6 GHz
Maximum Input Level: >O dBm
Amplitude Scale Log 1 0 dB/DIV and 1 dB/DIV
:
Minimum Resolution Bandwidth: G 3 0 0 kHz
Adjustable Reference Level
Input Frequency: 2 1.4 MHz
Sensitivity: 6 MHz/Volt
Error Voltage Output Polarity:
+
and Selectable
-
Adjustments; T Troubleshooting
H08 ( 2 2 GHz) is not available.
21.4 MHz and adds error voltage output polarity selection capability.
Recommended
MHz adjustable
from 18.6 GHz t o 22 GHz.
MODEL
Use*
Model
A standard