Brother SP-1 Online User's Manual page 84

Error Code Problem and Recommended Solutions
TS-06 The wireless security information (authentication method/encryption method/Network Key
(Password)) is incorrect.
Check the following points and try to set up your wireless connection again:
•
•
•
•
If you cannot find the Network Name (SSID) and security information, see the documentation
provided with your wireless router/access point, or contact the router manufacturer, your system
administrator, or Internet service provider.
TS-07 The machine cannot detect a wireless router/access point that has WPS (Wi-Fi Protected Setup)
enabled.
Check the following points and try again:
•
•
•
TS-08 Two or more wireless routers or access points that have WPS enabled are detected. Check the
following points and try again:
•
•
How to confirm wireless security information (SSID/authentication method/encryption method/Network Key)
of your WLAN access point/router:
1. The default security settings may be provided on a label attached to the WLAN access point/router. Or the
manufacturer's name or model number of the WLAN access point/router may be used as the default
security settings.
2. See the documentation provided with your WLAN access point/router for information on how to find the
security settings.
• If the WLAN access point/router is set to not broadcast the SSID, the SSID will not automatically be
detected. You will have to manually enter the SSID name.
• The Network key may also be described as the Password, Security Key, or Encryption Key.
If you do not know the SSID and wireless security settings of your WLAN access point/router or how to
change the configuration, see the documentation provided with your WLAN access point/router, ask the
manufacturer of your access point/router or ask your Internet provider or network administrator.
Related Information Related Information
• Print the WLAN Report
Related Topics:
• If You Are Having Difficulty with Your Machine's Network
Confirm the Network Key. If your Network Key contains upper-case and lower-case letters,
make sure you type them correctly.
Confirm whether the authentication method entered and the authentication method or
encryption method supported by the wireless router/access point are the same.
If the network key, authentication method, and encryption method have been confirmed,
restart your wireless router/access point and the machine.
If your wireless router/access point's Stealth Mode is on, you may need to disable it to
connect to the wireless network.
To check if your wireless router/access point supports WPS, look for the WPS symbol
displayed on the router/access point. For more information, see the documentation provided
with your wireless router/access point.
To set up your wireless connection using WPS, you must configure both your machine and
the wireless router/access point. For more information, see the user's guide.
If you do not know how to set up your wireless router/access point using WPS, see the
documentation provided with your wireless router/access point, or contact the router
manufacturer, your system administrator, or Internet service provider.
Make sure that only one wireless router/access point within range has WPS enabled, and
then try to connect again.
Try to connect again after a few minutes to avoid interference from other access points/
routers.
80