Brother SP-1 Online User's Manual page 226

Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job. Use
these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
• The timer will restart if any operation is carried out on the machine, such as a print job.
• The factory setting is five minutes.
1. Press [Settings] > [All Settings] > [General Setup] > [Sleep Time].
2. Enter the number of minutes (1-60) you want to set on the touchscreen, and then press [OK].
3. Press .
When the machine goes into Sleep Mode, the LCD backlight turns off.
Related Information Related Information
• General Settings
Related Topics:
• Set the Machine to Power Off Automatically
222