Load Legal Size Sublimation Paper in the Paper Tray
•
If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears
on the LCD, allowing you to change the paper size.
•
Load only one size and type of paper in the paper tray at a time.
•
When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Press the square paper tray expansion button (1) and slide out the paper tray until the square paper tray
expansion button locks into the square LGL hole.
25
1
2
1