Small Drink Default; Ice Buster; Restore Defaults - K-Tec BLENDTEC BDI Owner's Manual

7.4

Small Drink Default:

Use this feature to select the mode for the default drink size. There are 3 options.
The first is for the SMALL to be the default drink size (this means that SMALL
will be automatically selected after a drink has been made). The second is that the
drink size will remain the same after a drink has been made. The third option is
that no drink size will be selected after a drink is made (this requires that the user
select a drink size each time a drink is made).
7.4.1 To make a selection for the mode of operation press 3-5-6-GO.
7.4.2 The screen will show one of the 3 following options: "Revert To Small",
"Revert To Same", and "Revert To None".
7.4.3 Press the S or M button to scroll through the three options.
7.4.4 Once you have the option you want selected, press STOP. The setting you
selected will be stored.
7.5

Ice Buster:

The ice busters purpose is to run the ice auger for a period of time every so often
to keep the ice ready to be dispensed. This feature allows the Ice buster to be
enabled or disabled. The duration of the ice buster and the interval between ice
busting can also be set from this menu.
7.5.1 Access this menu press 3-5-7-GO.
7.5.2 The screen will read, "Ice Buster On" or "Ice Buster Off". Make a
selection by pressing the S or M button.
7.5.3 Press the GO button to advance the menu to the Interval between bust
cycles. The screen should read, "Interval (min)___". Enter the desired
interval in minutes and Press go to store the value and also to advance to
the duration of the bust cycle.
7.5.4 The screen will now read, "Duration (sec)___" Enter the desired duration
in seconds and press GO to store the value.
7.5.5 Press STOP to exit the menu.
7.6

Restore Defaults:

There are three types of restore defaults: Drink Settings, Blend Cycles, and Misc
Settings. These three will revert key setting back to the factory default. If you do
not have a profile that is installed at the factory then the default settings will
revert to "0".
7.6.1 Restore Drink Settings:
This feature will restore the Drink Settings to their factory defaults. Press
4-4-4-GO and the screen reads, "Reset Drinks?". Press GO again to
confirm that the drink settings should be reset to the defaults. The screen
will say "Storing Drinks" and a count will show the progress.
7.6.2 Restore Blend Cycles:
This feature will restore the Blend Cycles to their factory defaults. Press
4-4-5-GO and the screen reads, "Reset Cycles?". Press GO again to
confirm that the Blend Cycles should be reset to the defaults. The screen
will say "Storing Cycles" and a count will show the progress.
7.6.3 Restore Misc Settings:
This feature will restore various settings to their factory defaults. Press 4-
4-6-GO and the screen reads, "Reset Settings?". Press GO again to
confirm that the settings should be reset to the defaults. The settings that
OWN-003 Model BDI Owner's Manual – Blender Dispenser with Ice
18