Transport Controls - Novation FLkey 49 User Manual

Manual Installation steps:
1. Select and enable the FLkey MIDI and DAW input ports in the lower 'Input' panel:
• FLkey MIDI Out
• FLkey DAW Out (named MIDIIN2 on Windows)
2. Click on each Input and, using the red 'Port' tab below, set different port numbers for both.
• Port numbers can be set to anything not already in use (except 0)
• Choose different port numbers for the MIDI and DAW ports
3. Select each input and assign the scripts:
• Click on the MIDI input, click the 'Controller type' drop down and choose: 'Novation
FLkey MIDI'.
• Click on the DAW input, click the 'Controller type' drop down and choose: 'Novation
FLkey DAW'.
4. Click the output ports in the upper 'Output' panel and set the 'Port' numbers to match the
inputs.
• FLkey MIDI In.
• FLkey DAW In (named MIDIOUT2 on Windows).
• The scripts you set in Step 3 automatically link.
5. Select the DAW output (upper panel) and enable 'Send master sync'.
6. Near the bottom of the window, enable 'Pickup (takeover mode)'.
7. Click 'Refresh device list' in the bottom left.

Transport Controls

• The Play ▶ button works in the same way as FL Studio's Play button, it continues and pauses
playback.
• The Stop ■ button stops the playback and resets the play position.
• The Record ● button toggles FL Studio's recording state.
FLkey User Guide
12