3.2
SCSISelect Configuration Utility
The SCSISelect utility allows you to change SCSI controller settings
without opening the system or changing jumpers.
3.2.1
Overview
Default Values
Table 3-1 lists the settings that you can change using the SCSISelect
utility and the default value for each setting. Some settings apply
globally to the SCSI controller and all SCSI devices on the bus.
Other settings apply individually to each device on the bus.
Table 3-1
Settings for the SCSI Controller and All Devices
Item
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Boot Device Option
1
Host Adapter BIOS
Support Removable Disks under BIOS as Hard Disks
Extended BIOS Translation for DOS Drives > 1 GB
Display <Ctrl-A> Message During BIOS Initialization
Multiple Lun Support
BIOS Support for Bootable CD-ROM
BIOS Support for Int13 Extensions
Support for Ultra SCSI Speed
1
The settings are valid only if the host adapter BIOS is enabled.
3-4
Default
7
Enabled
Enabled
Low OFF/High ON
0 (zero)
Enabled
Boot only
Enabled
Enabled
Disabled
Enabled
Enabled
Disabled
User's Guide