Table of Contents
Advertisement
2.2.5
System Memory
The system automatically detects the total amount of onboard
memory during the POST and sets the memory parameters
accordingly.
If you install additional memory, the system
automatically adjusts the Total Memory parameter to display the new
memory size.
2.2.6
Math Coprocessor
The CPU includes a math coprocessor so this parameter shows
by default.
Installed
2.2.7
Video Display
The video display is the monitor on which the operating system
prompt appears when you boot the system. The system automatically
detects the video mode of your primary display and sets the
configuration value accordingly.
2.2.8
Communication Settings
The Communication Settings parameters allow you to set the baud
rate, parity, stop bit and data length for the first serial port (COM 1).
The values for this parameter are:
•
Baud rate
:
300
•
Parity
:
odd
•
Stop bit
:
or
1
•
Data length :
7
- or
The baud rate maximum value 9600 BPS
applies only to POST under UNIX
environment. The system I/O chipset
SMC 37C665 supports up to 115.2K bps.
2-8
to
bits per second (bps)
9600
,
even
, or
none
stop bits
2
8
-bit data word
User's Guide
Advertisement
Table of Contents
