Table of Contents
Advertisement
2.4.16 ATAPI IDE/Sony CD-ROM Audio (4-pin CD-ROM)
The ATAPI IDE/Sony CD-ROM Audio connector is used to connect the audio cable from either an ATAPI IDE or Sony
CD-ROM drive for playback, mixing, and recording.
2.4.17 Panel Connection (24-pin JFRNT)
JFRNT Connector
GREENLED
PWRLED
KEYLK
SPKR
RESET
IDELED
PWRBNT
SMISW
WARNING: To avoid the system from failing, turn off the power before connecting any devices to the system.
Chapter 3. BIOS Setup
3.1 CMOS Setup Utility
To activate CMOS Setup, press <DEL> key immediately after you turn on the system. The following message "Press
DEL to enter SETUP" should appear in the lower left hand corner of your screen.
When you enter the CMOS Setup Utility, the Main Menu will be displayed (Figure 3-1) . You can use arrow keys to select
your function, press <Enter> key to accept the selection and enter the sub-menu.
Function
Suspend Mode LED
Power LED
Keylock Switch
Speaker
Reset Switch
HDD LED
ATX Power Button Connector
Sleep Switch
Figure 3-1. CMOS Setup Utility Main Screen
ROM PCI/ISA BIOS (XXXXXXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Advertisement
Table of Contents
