2.5
System Security Setup
The Setup program has a number of security features to prevent
unauthorized access to the system and its data.
Enter the Setup program and select System Security. The following
screen appears:
Disk Drive Control
Diskette Drive.................[
Hard Disk Drive................[
System Boot Drive..............[Drive A then C]
Boot from CD-ROM...............[Disabled]
Onboard Communication Ports
Serial Port 1 Base Address.....[
Serial Port 2 Base Address.....[
Parallel Port Base Address.....[378 (IRQ 7)]
Operation Mode..............[Enhanced Parallel Port (EPP)] Mode
*ECP DMA Channel.........[-]
Onboard PS/2 Mouse (IRQ 12)......[Enabled ]
Setup Password...................[
Power On Password................[
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2.5.1
Disk Drive Control
The disk drive control features allow you to enable or disable the read/
write functions of a disk drive. These features can also control the
diskette drive or the hard disk drive boot function to prevent loading
operating systems or other programs from a certain drive while the
other drives are operational.
Table 2-1 lists the drive control settings and their corresponding
functions.
2-16
System Security
Normal
Normal
3F8h
]
2F8h
]
None
]
None
]
® ¬ = Change Setting
F1 = Help,
Esc = Exit
Page 1/1
]
]
User's Guide