Table of Contents
Advertisement
2.6
System Security Setup
The Setup program has a number of security features to prevent
unauthorized access to the system and its data.
The following screen appears if you enter the Setup program and
select System Security.
Disk Drive Control
Diskette Drive.................[
Hard Disk Drive................[
System Boot Drive..............[Drive A then C]
Boot from CD-ROM...............[Disabled]
Onboard Communication Ports
Serial Port 1 Base Address.....[
Serial Port 2 Base Address.....[
Parallel Port Base Address.....[378 (IRQ 7)]
Operation Mode..............[Standard Parallel Port (SPP)] Mode
ECP DMA Channel..........[-]
Onboard PS/2 Mouse (IRQ 12)......[Enabled ]
Setup Password...................[
Power On Password................[
¯ = Move Highlight Bar,
PgDn/PgUp = Move Screen,
2.6.1
Disk Drive Control
The disk drive control features allow you to enable or disable the read/
write functions of a disk drive. These features can also control the
diskette drive or the hard disk drive boot function to prevent loading
operating systems or other programs from a certain drive while the
other drives are operational.
Table 2-1 lists the drive control settings and their corresponding
functions.
BIOS Utility
System Security
Normal
Normal
3F8h
]
2F8h
]
None
]
None
]
® ¬ = Change Setting
F1 = Help,
Esc = Exit
Page 1/1
]
]
2-23
Advertisement
Chapters
Table of Contents
