Table of Contents
Advertisement
Resource table
Keyboard
Serial interface COM1
Serial port COM 2
Floppy disk drive controller
Parallel interface LPT1
RTC
USB controller
Mouse controller
Numeric processor
IDE controller 1
IDE controller 2
"assigned IRQ" = interrupts assigned as shipped
"Possible IRQ" = these interrupts can be used for your particular application
"Possible address" = this address can be used for your particular application
"Possible DMA" = these DMAs can be used for your particular application
Upgrading main memory
The system board is equipped with two 168 pin sockets with which the main memory can be
upgraded to a maximum of 256 Mbyte.
These slots are suitable for 16, 32, 64 and 128 Mbyte SDRAM memory modules of the DIMM
format.
Memory modules with different memory capacities can be combined.
DIMM = Dual Inline Memory Module
SDRAM = Synchronous Dynamic Random Access Memory
Depending on the processor type SDRAM memory modules must be designed for a
!
clock frequency of 66 MHz or 100 MHz or higher (meets PC100 specification).
A26361-K522-Z120-2-7419
assigned
possible
IRQ
IRQ
1
4, 11
3, 4
6
5, 7
8
9
12
13
14
15
Possible Address
(hex)
02E8, 02F8
03E8, 03F8
0378H, 0278H,
03BC
01F0H-01F7H
0170H-0177H
Resource table
Possible
DMA
2
1,3
English - 9
Advertisement
Table of Contents
