Configure Your Device; Basic Settings; Adjust The Image - Axis Q3819-PVE User Manual

Hide thumbs Also See for Q3819-PVE:

Table of Contents

AXIS Q3819-PVE Network Camera

Configure your device

Set the mounting position

1. Go to Video > Installation > Mounting position.

2. Click Change.

3. Select a mounting position and click Save and restart.

Set the power line frequency

1. Go to Video > Installation > Power line frequency.

2. Click Change.

3. Select a power line frequency and click Save and restart.

This section includes instructions about configuring your device. If you want to learn more about how certain features work, go

to Learn more on page 50.

Level the camera

To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment

of the camera.

1. Go to Video > Image > and click

2. Click

3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.

Benefit from IR light in low-light conditions by using night mode

Your camera uses visible light to deliver color images during the day. But as the visible light diminishes, color images become less

bright and clear. If you switch to night mode when this happens, the camera uses both visible and near-infrared light to deliver bright

and detailed black-and-white images instead. You can set the camera to switch to night mode automatically.

1. Go to Video > Image > Day-night mode, and make sure that the IR-cut filter is set to Auto.

2. To set at what light level you want the camera to switch to night mode, move the Threshold slider toward Bright or Dark.

Note

If you set the switch to night mode to occur when it's brighter, the image remains sharper as there is less low-light noise. If

you set the switch to occur when it's darker, the image colors are maintained for longer, but there is more image blur due

to low-light noise.

Reduce motion blur in low-light conditions

To reduce motion blur in low-light conditions, adjust one or more of the following settings in Video > Image > Exposure:

•

Move the Blur-noise trade-off slider toward Low motion blur.

to show the level grid.

Table of Contents