Snmp Communities - HP Switch 2800 Series Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
13-12

SNMP Communities

SNMP commuities are supported by the switch to allow management applica­
tion that use version 2c or version 1 to access the switch. The communities
are mapped to Group Access Levels that are used for version 2c or version 1
support. For more information see "Group Access Levels" on page 13-11. This
mapping will happen automatically based on the communities access privi­
leges, but special mappings can be added with the snmpv3 community com­
mand.
Syntax: [no] snmpv3 community
This command maps or removes a mapping of a
community name to a group access level. To remove a
mapping you only need the
< index < index-name >>
This is an index number or title for the mapping. The values of
1-5 are reserved and can not be mapped.
< name < com-name >>
This is the community name that is being mapped to a group
access level
< sec-name < security-name >>
This is the group level that the community is being mapped.
For more information see "Group Access Levels" on page
13-11.
< tag < tag-value >>
This is used to specify which target address may have access
via this index reference.
index_name.