Poe Operating Notes - HP Switch 2800 Series Management And Configuration Manual

Hide thumbs Also See for Switch 2800 Series:

Table of Contents

Power Over Ethernet (PoE) Operation for the Series 2600-PWR Switches

PoE Operating Notes

Simply disabling a PoE port does not affect power delivery through

that port. To cycle the power on a PD receiving power from a PoE

port on the switch, disable, then re-enable the power to that port. For

example, to cycle the power on a PoE device connected to port 1 on

a 2600-PWR switch:

HPswitch(config)# no interface 1 power

HPswitch(config)# interface 1 power