Configuration; Ethernet Configuration - Pitney Bowes DP50S Operating Instructions Manual

4. Configuration

This chapter explains supported network connections, and settings for the IP addresses and the
Wireless LAN security.

Ethernet Configuration

Configure the following network settings according to the network environment using the control
panel.
• The following table shows the control panel settings and their default values. These items appear
in the [Host Interface] menu.
Setting Name
Machine IPv4 Address
IPv6 Stateless Setting
IPsec
NW Frame Type
Effective Protocol
Ethernet Speed
IEEE802.1X Auth. (Ethernet)
Restr.IEEE802.1X Auth.Def.
LAN Type
• If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all
set automatically.
Default
• DHCP: On
• IPv4 Address: 11.22.33.44
• Subnet Mask: 0.0.0.0
• Gateway Address: 0.0.0.0
Active
Inactive
Auto Select
• IPv4: Active
• IPv: Inactive
• NetWare: Inactive
• SMB: Active
• Apple Talk: Inactive
Auto Select
Inactive
-
Ethernet
4
47