Hitachi 8953H User Manual page 51

3.6 Confirm the connection to your destination (continued)
n A Slideshow is currently running on the projector that you are trying to display to.
The projector you want to send your images
to is in the Slide show mode in the PC-LESS
Presentation.
• Click [Yes], then the projector is switched
from the Slide show mode to the Live
Mode.
• Click [No], then the projector is remained
in the Slide show mode, and the "Live
Viewer 3" main menu is displayed in
stand-by mode on your PC.
n Are you sure you want to switch to Live Mode?
The projector is not set to the Live Mode.
• Click [Yes], then the projector is switched
to the Live Mode.
• Click [No], then the projector is remained
as it is, and the "Live Viewer 3" main
menu is displayed in stand-by mode on
your PC.
n Are you sure you want to change the input channel of the Projector to MIU?
The projector is not set to the MIU as an
input signal.
• Click [Yes], then the projector is switched
to the MIU.
• Click [No], then the projector is remained
as it is, and the "Live Viewer 3" main
menu is displayed in stand-by mode on
your PC.
3. Using the Live Mode
51