Page 1 Japan, the United States of America and other countries and areas. • Blu-ray Disc and Blu-ray are trademarks of Blu-ray Disc Association. ® • StarBoard is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries. All other trademarks are the properties of their respective owners.
Page 2 Read this Safety Guide first. Projector User's Manual - Safety Guide Thank you for purchasing this projector. WARNING • Before using, read these user's manuals of this projector to ensure correct usage through understanding. After reading, store them in a safe place for future reference.
Page 3: Safety Precautions
Safety Precautions WARNING Never use the projector if a problem should occur. Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. can cause a fire or electrical shock. In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet.
Page 4 Safety Precautions (continued) WARNING Be cautious of High temperatures of the projector. High temperatures are generated when the lamp is lit. It could result in fire or burn. Use special caution in households where children are present. Do not touch about the lens, air fans and ventilation openings during use or immediately after use, to prevent a burn.
Page 5 Safety Precautions (continued) WARNING Be careful in handling the light source lamp. The projector uses a high-pressure mercury glass lamp made of glass. The lamp can break with a loud bang, or burn out. When the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
Page 6 Safety Precautions (continued) CAUTION Be careful in moving the projector. Neglect could result in an injury or damage. • Do not move the projector during use. Before moving, disconnect the power cord and all external connections, and close the slide lens door or attach the lens cap.
Page 7 Safety Precautions (continued) CAUTION Remove the power cord for complete separation. • For safety purposes, disconnect the power cord if the projector is not to be used for prolonged periods of time. Disconnect the • Before cleaning, turn off and unplug the projector. Neglect could result in plug from the fire or electrical shock.
Page 8 Safety Precautions (continued) NOTE About consumables. Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans have a different lifetime in each. These parts may need to be replaced after a long usage time. • This product isn’t designed for continuous use of long time. In the case of continuous use for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or repetitious use, the lifetime may be shortened, and these parts may need to be replaced even if one year has not passed since the beginning of using.
Page 9 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 10 Regulatory Notices FCC Statement Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 11: Table Of Contents
Contents Introduction ....3 SETUP menu ....45 , D- Features ..... . 3 ZOOM SHIFT POSIT...
Page 12: Introduction
Introduction Introduction Features The projector provides you with the broad use by the following features. The unique lens and mirror system realizes ultra short distance projection,which gives you more various way of use. The motorized lens door offers you very simple use of the projector. The double layer ﬁlter system is expected to function longer and offers you less maintenance frequency.
Page 13: Part Names
Introduction Part names HOT! Projector 101) (1) Lamp cover ( The lamp unit is inside. (2) Control panel ( (12) (3) Elevator feet (x 2) ( (4) Remote sensor ( (14) 106) (5) Lens ( (11) (6) Intake vents (13) 103) (7) Filter cover ( (10)
Page 14 Introduction Control panel (1) STANDBY/ON button ( (2) INPUT button ( 20, 111, 112) (3) POWER indicator ( 111, 112) (4) TEMP indicator ( 111, 112) (5) LAMP indicator ( Buttons ◄/►/▲/▼ (6) FOCUS +/- buttons 26), when no menu is displayed ( 30).
Page 15 Introduction Remote control (1) VIDEO button ( (10) (2) COMPUTER button ( (3) SEARCH button ( MY SOURCE/ VIDEO COMPUTER DOC.CAMERA (4) STANDBY/ON button ( ASPECT AUTO SEARCH BLANK (16) (12) (5) ASPECT button ( MAGNIFY PAGE VOLUME FREEZE (14) (6) AUTO button ( DOWN (11)
Page 16: Setting Up
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to table T-1 and ﬁgures F-1 and F-2 at the end of User's Manual (concise) to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280 x 800 Screen size (diagonal) Projection distance (±8%)
Page 17 Setting up Arrangement (continued) WARNING ►Place the projector in a cool place, and ensure that there is sufﬁcient ventilation. The high temperature of the projector could cause ﬁre, burns and/or malfunction of the projector. • Do not stop-up, block or otherwise cover the projector's vents. •...
Page 18: Connecting With Your Devices
Setting up Connecting with your devices Before connecting the projector to a device, consult the manual of the device to conﬁrm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come with the product or the accessory is damaged.
Page 19 Setting up Connecting with your devices (continued) About Plug-and-Play capability • Plug-and-Play is a system composed of a computer, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a computer that is VESA DDC (display data channel) compatible.
Page 20 Setting up Connecting with your devices (continued) NOTE • Before connecting the projector to a computer, consult the computer’s manual and check the compatibility of the signal level, the synchronization methods and the display resolution output to the projector. - Some signal may need an adapter to input this projector. - Some computers have multiple screen display modes that may include some signals which are not supported by this projector.
Page 21 Setting up Connecting with your devices (continued) • If you insert a USB storage device, such as a USB memory, into the USB TYPE A port and select the port as the input source, you can view images stored in the 87).
Page 22 Setting up Connecting with your devices (continued) To use network functions of the projector, connect the LAN port with the computer's LAN port, or with an access point that is connected to the computer with wireless LAN, using a LAN cable. To use NETWORK BRIDGE function, also connect the CONTROL port and an RS-232C port of the external device to communicate as a network terminal.
Page 23: Connecting To A Power Supply
Setting up Connecting to a power supply Put the connector of the power cord into the AC IN (AC inlet) of the projector. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange.
Page 24: Using The Security Bar And Slot
Setting up Using the security bar and slot Security slot A commercial anti-theft chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock.
Page 25: Using The Cable Cover
Setting up Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector ﬁrst. Combine parts as shown in ﬁgure, and assemble the cable cover. Insert the three knobs on the cable cover into the three holes on the projector as shown in the ﬁgure.
Page 26: Remote Control
Holding the hook part of the battery cover, remove it. Align and insert the two AA batteries (HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control.
Page 27: Changing The Frequency Of Remote Control Signal
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal ASPECT AUTO SEARCH BLANK frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control MAGNIFY PAGE VOLUME FREEZE does not function properly, attempt to change the signal frequency. DOWN In order to set the Mode, please keep pressing the combination of MY BUTTON...
Page 28: Interactive Pen
Turn the battery cover of the pen to the left to open As illustrated in the diagram, insert the AAA battery into the battery cover with the - end facing the front. (HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No. LR03) Attach the battery cover by turning it to the right until it is completely closed.
Page 29: Power On/Off
Power on/off Power on/off Turning on the power STANDBY/ON button Make sure that the power cord is ﬁrmly POWER indicator and correctly connected to the projector and the outlet. Make sure that the POWER indicator is 111). steady orange ( Conﬁrm that there is nothing that the lens door hits while opening.
Page 30 Power on/off Turning off the power Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Conﬁrm that there is nothing that the lens door hits while closing. Press the STANDBY/ON button again while the message appears.
Page 31: Operating
Operating Operating VOLUME +/- button Adjusting the volume MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK Use the VOLUME +/VOLUME - buttons to adjust the volume. MAGNIFY PAGE VOLUME A dialog will appear on the screen to aid you in adjusting the FREEZE volume.
Page 32 Operating Selecting an input signal (continued) COMPUTER button Press COMPUTER button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA COMPUTER IN1 COMPUTER IN2 ASPECT AUTO...
Page 33: Searching An Input Signal
Operating Searching an input signal Press SEARCH button on the remote control. SEARCH button The projector will start to check its input ports as below in order to ﬁnd any input signals. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA When an input is found, the projector will stop searching ASPECT AUTO SEARCH...
Page 34: Adjusting The Projector's Elevator
Operating Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.
Page 35: Using The Automatic Adjustment Feature
Operating Press the FOCUS + or FOCUS – button on the remote FOCUS - button control, or FOCUS + or FOCUS – button on the projector ( while no menu is on screen, to display the FOCUS box on MY SOURCE/ VIDEO COMPUTER DOC.CAMERA...
Page 36: Adjusting The Position
Operating Adjusting the position Press the POSITION button on the remote control while no menu POSITION MENU 45) dialog on screen. is on screen, to display the D-SHIFT ( ENTER RESET Use the ▲, ▼, ◄ and ► buttons to adjust the picture position. Press the POSITION button again to ﬁnish this operation.
Page 37: Using The Magnify Feature
Operating Using the magnify feature Press the MAGNIFY ON button on the remote control. MAGNIFY ON/OFF button The picture will be magniﬁed, and the MAGNIFY dialog will appear on the screen. When the MAGNIFY ON button is MY SOURCE/ pressed for the ﬁrst time after the projector is turned on, the VIDEO COMPUTER DOC.CAMERA...
Page 38: Temporarily Freezing The Screen
Operating Temporarily freezing the screen FREEZE button Press the FREEZE button on the remote control. The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for MY SOURCE/ VIDEO COMPUTER DOC.CAMERA 52)), and the the MESSAGE item in the SCREEN menu ( ASPECT...
Page 39: Using The Menu Function
Operating Using the menu function This projector has the following menus: INTERACTIVE, PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, SECURITY and EASY MENU. EASY MENU consists of functions often used, and the other menus are classiﬁed into each purpose and brought together as the ADVANCED MENU. Each of these menus is operated using the same methods.
Page 40 Operating Using the menu function (continued) To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ●...
Page 41: Easy Menu
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description Executing this item starts (or cancels) calibration of the position of the pen.
Page 42 EASY MENU Item Description Using the ◄/► buttons switches the picture mode. The picture modes are combinations of GAMMA and COLOR TEMP settings. Choose a suitable mode according to the projected source. NORMAL CINEMA DYNAMIC BOARD(BLACK) DAYTIME WHITEBOARD BOARD(GREEN) GAMMA COLOR TEMP NORMAL 1 DEFAULT...
Page 43: Interactive Menu
INTERACTIVE menu INTERACTIVE menu Item Description Executing this item starts (or cancels) calibration of the position of the pen. INTERACTIVE For more details, refer to the manual for the “StarBoard Software” in 80). the bundled DVD-ROM (...
Page 44: Picture Menu
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 45 PICTURE menu Item Description Using the ▲/▼ buttons switches the color temperature mode. 1 HIGH 1 CUSTOM 2 MID 2 CUSTOM 6 CUSTOM 3 LOW 6 Hi-BRIGHT-3 3 CUSTOM 5 CUSTOM 5 Hi-BRIGHT-2 4 CUSTOM 4 Hi-BRIGHT-1 To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ►...
Page 46 PICTURE menu Item Description Using the ◄/► buttons adjusts the sharpness. Weak Strong SHARPNESS • There may be some noise and/or the screen may ﬂicker for a moment when an adjustment is made. This is not a malfunction. Using the ▲/▼ cursor buttons changes the active iris control mode. PRESENTATION THEATER PRESENTATION : The active iris displays the best presentation...
Page 47: Image Menu
IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 48 IMAGE menu Item Description Using the ◄/► buttons adjusts the vertical position. Down • Over-adjusting the vertical position may cause noise to appear on the screen. If this occurs, please reset the vertical position to the default setting. Pressing the RESET button when the V POSITION V POSITION is selected will reset the V POSITION to the default setting.
Page 49 IMAGE menu Item Description Using the ◄/► buttons adjusts the horizontal phase to eliminate ﬂicker. Right Left H PHASE • This item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port.
Page 50: Input Menu
INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 51 INPUT menu Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ▲/▼ buttons to select the input port. (2) Using the ◄/► buttons switches the mode for video format. AUTO NTSC SECAM VIDEO FORMAT N-PAL M-PAL...
Page 52 INPUT menu Item Description The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ buttons to select the COMPUTER IN port to be set. (2) Use the ◄/► buttons to select the computer input signal type. AUTO SYNC ON G OFF COMPUTER IN...
Page 53 INPUT menu Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed.
Page 54: Setup Menu
SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 55 SETUP menu Item Description Using the ◄/► buttons corrects the horizontal keystone distortion. Shrink the right of the image Shrink the left of the image • The adjustable range of this function will vary among inputs. For KEYSTONE some input, this function may not work well. •...
Page 56 SETUP menu Item Description Using the ▲/▼ buttons changes the eco mode setting. NORMAL • When the ECO is selected, acoustic noise and screen brightness ECO MODE are reduced. 46) is set to ON, the projector will • When AUTO ECO MODE ( always be set to Eco mode at start-up regardless this setting.
Page 57: Audio Menu
AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to the following table.
Page 58 AUDIO menu Item Description Using the ▲/▼ buttons switches the mode for the HDMI audio. Check each of the two modes provided and select the suitable one HDMI AUDIO for your HDMI audio device. Using the ▲/▼ buttons switches the input level to match that of the microphone connected to the MIC port.
Page 59: Screen Menu
SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Page 60 SCREEN menu Item Description This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
Page 61 SCREEN menu Item Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. When the ON is selected, the item MyScreen is locked. Use this MyScreen Lock function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the 75).
Page 62: Ource Name
SCREEN menu Item Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼...
Page 63 SCREEN menu Item Description (6) The current name will be displayed on the ﬁrst line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄...
Page 64 SCREEN menu Item Description The C.C. is the function that displays a transcript or dialog of the audio portion of a video, ﬁles or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C.
Page 65: Option Menu
OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME.
Page 66: Auto Power Off , U
OPTION menu Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically. AUTO POWER When the time is set to 1 to 99, and when the passed time with no- signal or an unsuitable signal reaches at the set time, the projector...
Page 67 OPTION menu Item Description The lamp time is the usage time of the lamp, counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. To reset the lamp time, select the OK using the ►...
Page 68 OPTION menu Item Description This item is to assign one of the following functions to MY BUTTON 1/2 on the remote control ( (1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1/2) and press the ► or ENTER button to display the MY BUTTON setup dialog.
Page 69 OPTION menu Item Description • ACTIVE IRIS: Changes the active iris mode. 33). • PICTURE MODE: Changes the PICTURE MODE ( 58). • FILTER RESET: Displays the ﬁlter time reset conﬁrmation dialogue ( • TEMPLATE: Makes the template pattern selected to the 54) appear or disappear.
Page 70 OPTION menu Item Description Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans.
Page 71 OPTION menu Item Description KEY LOCK (1) Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE CONTROL. (2) Use the ◄/► buttons to turn the key lock function on/off. When ON is selected, all buttons on the projector or remote control except the STANDBY/ON button are locked.
Page 72 OPTION menu Item Description REMOTE FREQ. (1) Use the ▲/▼ button to change the projector's remote sensor 4, 18). frequency setting ( 1:NORMAL 2:HIGH (2) Use the ◄/► button to change the projector's remote sensor on or off. The factory default setting is for both 1:NORMAL and 2:HIGH to be on.
Page 73 OPTION menu Item Description COMMUNICATION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands ( Network Bridge Function in the...
Page 74 OPTION menu Item Description RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF: Select this mode if it is not required to check the responses from the device that the projector sends data to.
Page 75 OPTION menu Item Description INFORMATION Selecting this item displays a dialog titled “INPUT_INFORMATION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • This item can't be selected for no signal and sync out. SERVICE •...
Page 76: Network Menu
NETWORK menu NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions.
Page 77 NETWORK menu Item Description Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF. IP ADDRESS • The IP ADDRESS is the number that identiﬁes this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.
Page 78 NETWORK menu Item Description (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the ﬁrst 3 lines.
Page 79 NETWORK menu Item Description Selecting this item displays the MY IMAGE menu. To store images in the projector, the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User’s manual - Network Guide) and the ►...
Page 80 NETWORK menu Item Description Selecting this item displays the PRESENTATION menu. Use ▲/▼ buttons to select one of the following items, then press ► or ENTER button to use the function. If you set a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is blocked.
Page 81 NETWORK menu Item Description • To change from Multi PC mode to Single PC mode, select one of computers in the dialog using the ▲/▼/◄/► buttons and press the ENTER or INPUT button. Press the ► button to choose OK, and then press ENTER or INPUT again.
Page 82: Service
NETWORK menu Item Description Selecting this item displays the NETWORK_INFORMATION dialog for conﬁrming the network settings. INFORMATION • For the details of PASSCODE, see the section Selecting the network connection method in the User’s manual – Network Guide. • Only the first 16 characters of the projector name are displayed. •...
Page 83: Security Menu
SECURITY menu SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. To use SECURITY menu: User registration is required before using the security functions. Enter to the SECURITY menu 1.
Page 84 SECURITY menu Item Description The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 Turning on the MyScreen PASSWORD 1-1 Use the ▲/▼ buttons on the SECURITY menu to select MyScreen PASSWORD and press the ►...
Page 85 SECURITY menu Item Description PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 Turning on the PIN LOCK 1-1 Use the ▲/▼ buttons on the SECURITY menu to select PIN LOCK and press the ► button or the ENTER button to display the PIN LOCK on/off menu.
Page 86: Transition Detector
SECURITY menu Item Description If this function is set to ON when the vertical angle of the projector or MIRROR setting at which the projector is turned on is different than the previously recorded, the TRANSITION DETECTOR ON alarm will be displayed and the projector will not display the input signal.
Page 87 SECURITY menu Item Description The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT; • The MY TEXT DISPLAY menu will be unavailable, which can prohibit changing the DISPLAY setting. •...
Page 88 SECURITY menu Item Description (1) Use the ▲/▼ buttons on the SECURITY menu to select the MY TEXT DISPLAY and press the ► or ENTER button to display the MY TEXT DISPLAY on/off menu. (2) Use the ▲/▼ buttons on the MY TEXT DISPLAY on/off menu to select on or off.
Page 89: Presentation Tools
Presentation tools Presentation tools The projector has the following three convenient tools that enable on-screen presentations easily and quickly: below) - Interactive Function ( - PC-LESS Presentation ( - USB Display ( Interactive Function USB cable Computer cable Interactive Function enables interactive operations, such as operation of the connected computer and writing on the screen using the “StarBoard Software”, by making use of the built-in sensor of the projector and the supplied pen without the need of a special board.
Page 90 Presentation tools Interactive Function (continued) When using the interactive function, the recommended computer speciﬁcations are shown below. CPU: Intel Core2 Duo 2.0 GHz or faster ® Memory: 1 GB or more (Windows ® ® 2 GB or more (Windows Vista and Windows HDD: 600 MB free space...
Page 91 Presentation tools NOTE • Install and use at a position where the screen size is between 60"- 100" when digital zoom is at the maximum (100%) and the KEYSTONE and PERFECT FIT functions are not used. If the KEYSTONE or PERFECT FIT function is used, the position of the pen may not be reﬂected correctly on the screen, or pen operation may not yield any response even on the 60''-100'' sized screen.
Page 92 Presentation tools Interactive Function (continued) Connection during use Follow the procedure below to connect the computer to the projector. Computer HDMI DISPLAY HDMI COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 MONITOR OUT CONTROL...
Page 93 Presentation tools Interactive Function (continued) Preliminary preparation To use the Interactive Function, a special pen is needed ( 19). Insert battery into the pen before using ( Using the pen To write or draw using the pen, press the tip of the pen against the screen surface and move the pen accordingly.
Page 94 Presentation tools Interactive Function (continued) Basic pen operation In the default setting, the button at the tip of the pen is assigned with the function ® of the left mouse button. When Windows is running, you can perform the following mouse operations using the button at the tip of the pen. •...
Page 95 Hitachi Interactive Projector, or the projector. ("StarboardSoftware" is not changed). • The set of functions that are available for the combination of Hitachi Interactive Projector and Starboard Software is in conformity with the Starboard FX Portable Series.
Page 96: Pc-Less Presentation
Presentation tools PC-LESS Presentation The PC-LESS Presentation reads image data from storage media inserted into the USB TYPE A port and displays the image on the following modes. The PC-LESS Presentation can be started by selecting the USB TYPE A port as the input source. This feature allows you to make your presentations without using your computer.
Page 97 Presentation tools PC-LESS Presentation (continued) Thumbnail mode The Thumbnail mode displays the images stored in a USB storage device on the Thumbnail screen. Maximum 20 images are displayed in a screen. If you wish, you can jump into the Full Screen mode or Slideshow mode, after you select some images in the Thumbnail mode.
Page 98 Presentation tools PC-LESS Presentation (continued) Operating by buttons or keys You can control the images in the Thumbnail screen with the remote control or keypad or a web browser software. The following functions can be supported while the Thumbnail is displayed. Button operation Functions The keypad on...
Page 99 Presentation tools PC-LESS Presentation (continued) Operating by the menu on the Thumbnail screen You can also control the images by using the menu on the Thumbnail screen. Item Functions Moves to an upper folder. SORT Allows you to sort ﬁles and folders as following. Press the ►...
Page 100 Presentation tools PC-LESS Presentation (continued) NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in 1 page as maximum. • It is not possible to change the input port by using the INPUT button when the Thumbnail screen, Slideshow, or Full Screen is displayed.
Page 101 Presentation tools PC-LESS Presentation (continued) Full Screen Mode The Full Screen mode shows a full display image. To display in Full Screen mode, select an image in the Thumbnail screen. Then press the ENTER button on the remote control or the INPUT button on the keypad, or click [ENTER] on the Web Remote Control.
Page 102: Slideshow Mode, Playlist
Presentation tools PC-LESS Presentation (continued) Slideshow mode The Slideshow mode displays images in full screen and switches the images at 88). intervals set in INTERVAL on the Thumbnail screen menu ( You can start this function from the Slideshow menu. To display the Slideshow menu, select the SLIDESHOW button in the Thumbnail mode and press the ENTER button on the remote control or INPUT button on the projector.
Page 103 Presentation tools PC-LESS Presentation (continued) You can play the Slideshow at your desired conﬁguration. Conﬁgure the Slideshow items in the Thumbnail. 1) RETURN : Returns to the thumbnail mode. 2) PLAY : Play the Slideshow. 3) START : Set the beginning number of the Slideshow.
Page 104 Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text ﬁle, which decides the order of displayed still image ﬁles in the Thumbnail or Slideshow. The playlist ﬁle name is “playlist.txt” and it can be edited on a computer. It is created in the folder that contains the selected image ﬁles when the PC-LESS Presentation is started or the Slideshow is conﬁgured.
Page 105: Usb Display
• If "Waiting for connection." remains displayed while the USB cable is connected, remove the USB cable and reconnect after a while. • Please check and get the latest version at Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Follow the instructions that can be obtained at the site for updating.
Page 106 Presentation tools This application will appear in the Windows notiﬁcation area once it starts. You can quit the application from your computer by selecting “Quit” on the menu. NOTE • The “LiveViewer” (refer to the User's Manual - Network Guide) and this application cannot be used at the same time.
Page 107 Presentation tools USB Display (continued) Right-Click menu The menu shown in the right will be displayed when you right-click the application icon in the Windows notiﬁcation area. Display : The Floating menu is displayed, and the icon disappears from the Windows notiﬁcation area.
Page 108: Options Window
Presentation tools USB Display (continued) Options window If you select the Option button on the Floating menu, the Options window is displayed. Optimize Performance The “LiveViewer Lite for USB” captures screenshots in JPEG data and sends them to the projector. The “LiveViewer Lite for USB” has two options that have different compression rate of JPEG data.
Page 109 Presentation tools USB Display (continued) Display LiveViewer Lite for USB If you want to display the LiveViewer application window on the screen, please check the box. NOTE • Please check this box when you use Starboard Software with BZ-1/ BZ-1M. The annotation layer may not display on the projector image when this option is OFF.
Page 110: Maintenance
Maintenance Maintenance Replacing the lamp A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
Page 111: Lamp Warning
Maintenance Replacing the lamp (continued) Lamp warning HIGH TEMPERATURE HIGH PRESSURE HIGH VOLTAGE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.
Page 112: Cleaning And Replacing The Air Filter
Maintenance Cleaning and replacing the air ﬁlter The air ﬁlter unit of this projector consists of a ﬁlter cover, two kinds of ﬁlters, and a ﬁlter frame. The new double large ﬁlters system is expected to function longer. However, please check and clean it periodically to keep ventilation needed for normal operation of the projector.
Page 113 Maintenance Cleaning and replacing the air ﬁlter (continued) Turn the projector on and reset the ﬁlter time using the FILTER TIME item in the EASY MENU. (1) Press the MENU button to display a menu. (2) Point at the FILTER TIME using the ▼/▲ button, then press the ► button. A dialog will appear.
Page 114: Replacing The Internal Clock Battery
This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL or HITACHI MAXELL ENERGY, part number CR2032 or CR2032H. Battery cover Turn the projector off, and unplug the power cord.
Page 115: Caring For The Mirror And Lens
Maintenance Caring for the mirror and lens If the projection mirror or lens is ﬂawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet.
Page 116: Other Care
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the cabinet and remote control Incorrect care could have adverse inﬂuence such as discoloration, peeling paint, etc.
Page 117 Maintenance Other care (continued) WARNING ►Before caring, make sure the power cord is not plugged in, and then allow the projector to cool sufﬁciently. The care in a high temperature state of the projector could cause a burn and/or malfunction to the projector. ►Never try to care for the inside of the projector personally.
Page 118: Troubleshooting
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if abnormal operations such as smoke, Troubleshooting strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet.
Page 119 Troubleshooting Related messages (continued) Message Description The internal temperature is rising. Please turn the power off, and allow the projector to cool down at least 20 minutes. After having conﬁrmed the following items, please turn the power ON again. • Is there blockage of the air passage aperture? •...
Page 120: Regarding The Indicator Lamps
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP Description indicator indicator indicator Lighting Turned Turned The projector is in a standby state. Orange Please refer to the section “Power on/off”.
Page 121 Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP Description indicator indicator indicator There is a possibility that the interior portion has become heated. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufﬁciently cooled down, please make Blinking conﬁrmation of the following items, and then turn the power on again.
Page 122: Resetting All Settings
Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of 66) can reset all settings (except settings such SERVICE item in OPTION menu ( as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, SECURITY and NETWORK) to the factory default.
Page 123 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The signal cables are not correctly connected. 9 ~ 13 Correctly connect the audio cables. The MUTE function is working. Restore the sound pressing MUTE or VOLUME +/- button on the remote control.
Page 124 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The FREEZE function is working. Video screen display freezes. Press FREEZE button to restore the screen to normal. Color settings are not correctly adjusted.
Page 125 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The computer The computer cannot start up in the current hardware connected to the conﬁguration. USB TYPE B port Disconnect the USB cable from the computer, then of the projector reconnect it after starting up the computer.
Page 126 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Is the use of USB cables disabled? Enable the use of USB cables. The “StarBoard Software” may not be recognized if your laptop has a built-in modem. –...
Page 127 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page This may be due to poor contact of the battery. Remove the battery and load it again. Be sure to use only the batteries speciﬁed. Has the battery run out? Replace it with a new one.
Page 128 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Is the power supply for the projector used at the same time for other electrical products that require a measurable amount of power? Use a separate power supply for other electrical products with a high power consumption.
Page 129 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page Is the projector correctly installed? 81, 82 Check the installed position of the projector. Is the computer image projected within the area of the screen? Install and use at a position where the screen size is between 60"-100"...
Page 130 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Reference Phenomenon Cases not involving a machine defect page The interactive pen may stop working when plugging in the USB cable or booting up a computer on which Starboard Software has been installed.
Page 131: Speciﬁcations
Speciﬁcations Speciﬁcations Please see the Speciﬁcations in the User’s Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party copyrights for each of such software modules.
Page 132 Projector CP-AW2519N (Type nos. CP-AW2519N, CP-AW2519NM) User's Manual (detailed) Network Guide Thank you for purchasing this product. This manual is intended to explain only the network function. For proper use of this product, please refer to this manual and the other manuals for this product.
Page 133 Contents Contents 1. Connection to the Network ............4 1.1 System requirements ................. 4 1.1.1 Required equipment preparation ..................4 1.1.2 Hardware and software requirement for computer ............4 1.2 Installing the “LiveViewer” ................6 1.2.1 Installing the “LiveViewer” ....................6 1.2.2 Updating the “LiveViewer”...
Page 134 Contents 3. Web Control ................46 3.1 Logon ....................... 47 3.2 Network Information ................. 49 3.3 Network Settings ..................50 3.4 Port Settings ..................... 51 3.5 Mail Settings ..................... 53 3.6 Alert Settings .................... 54 3.7 Schedule Settings ..................56 3.8 Date/Time Settings ...................
Page 135: Connection To The Network
1. Connection to the network 1. Connection to the Network 1.1 System requirements 1.1.1 Required equipment preparation The following equipments are required to connect the projector to your computer through the network. Projector LAN cable (to connect the projector to a network): CAT-5 or greater Computer (minimum 1 set): equipped with the network feature (100Base-TX or 10Base-T) 1.1.2 Hardware and software requirement for computer...
Page 136 • Referring to the manual of your computer or Windows, select the following or a smaller display resolution for the computer. CP-AW2519N,CP-AW2519NM: 1280 x 800 When a resolution larger than the speciﬁed resolution is selected, the projector will convert and display in the speciﬁed resolution, and the display speed may become faster.
Page 137: Installing The "Liveviewer
1. Connection to the network 1.2 Installing the “LiveViewer” 1.2.1 Installing the “LiveViewer” The “LiveViewer” software needs to be installed on all the computers to connect to the projector through a network. You need to log in as an administrator user to install the software. 1) Turn on the computer.
Page 138 1. Connection to the network 1.2 Installing the “LiveViewer” (continued) 6) The License Agreement dialog appears. If you accept it, select “I accept the terms of the license agreement” and press the [Next]. 7) The Choose Destination Location dialog appears. Press the [Next]. NOTE •...
Page 139: Updating The "Liveviewer
1. Connection to the network 1.2.2 Updating the “LiveViewer” Please check and get the latest version at Hitachi Web site. http://www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com Some functions explained in this manual require the “LiveViewer” Version 4.xx. (In the version information a number between 00 and 99 will replace the xx.) LiveViewer function use depends on the model you are using.
Page 140: Process To Connect The Network
1. Connection to the network 1.3 Process to connect the network Before connecting your computer and projector via a network, make sure that the LAN port is selected as the input source on the projector. ( Operating in the User’s Manual – Operating Guide) Otherwise a connection cannot be established. 1.3.1 Process overview An overview of the process to connect your computer and the projector via a network is shown below.
Page 141: Starting The "Liveviewer
1. Connection to the network 1.3 Process to connect the network (continued) 1.3.2 Starting the “LiveViewer” Start the “LiveViewer” in your computer, taking one of the followings. • Double click the “LiveViewer” icon on the Desktop in your computer. • Select “Start” → “All Programs” → “Projector Tools” → “LiveViewer” on Windows menu.
Page 142: Selecting The Network Connection Mode
1. Connection to the network 1.4 Selecting the network connection mode After starting the “LiveViewer”, the “Select the Network Connection” screen comes up. Select the network connection that you would like to use. There are 3 options in the menu. •...
Page 143 1. Connection to the network 1.4 Selecting the network connection mode (continued) A network connection was not established. The screen is displayed in the case that the projector is not connected with a LAN cable to your computer when the wired LAN is selected.
Page 144: Selecting My Connection
1. Connection to the network 1.4 Selecting the network connection mode (continued) 1.4.2 Selecting My Connection Select the [My Connection] and click the [Connect]. If you select the My Connection, the computer is connected to the projector through the network by using the proﬁle data that is pre- assigned to My Connection.
Page 145 1. Connection to the network 1.4 Selecting the network connection mode (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item 1.8 Conﬁrming the connection to your destination.
Page 146: Selecting The Network Connection Method
1. Connection to the network 1.5 Selecting the network connection method There are some options to connect to the network. • Enter PassCode • Conﬁgure Manually • Select From List Select one of them to meet your requirement. Enter PassCode If you want to use the Passcode for network connection, select the [Enter PassCode] and click the [Next].
Page 147: Passcode Connection
1. Connection to the network 1.5 Selecting the network connection method (continued) 1.5.1 Passcode connection The unique Passcode system brings you very quick and simple connection to the network. The Passcode is a code that expresses the network setting in the projector. If you input the code in the “LiveViewer”...
Page 148 1. Connection to the network 1.5 Selecting the network connection method (continued) Method 2 1) Turn on the projector, and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼ buttons on the projector to show the menu on screen.
Page 149 1. Connection to the network 1.5 Selecting the network connection method (continued) (2) Entering the Passcode If you select [Enter PassCode] at item 1.5, the “Please enter the PassCode” screen is displayed. Please enter the Passcode divided 4-digit each in 3 boxes (total 12-digit). Example PASSCODE: 1234 - 5678 - 9ABC After entering the Passcode, click the [Connect] to start the connection to the projector.
Page 150 1. Connection to the network 1.5 Selecting the network connection method (continued) A network connection could not be established. Windows prevented network conﬁguration changes. You may log in the Windows under User authority. Click the [OK], then the “LiveViewer” main menu is displayed even though the network is not established.
Page 151 1. Connection to the network 1.5 Selecting the network connection method (continued) If you put a check mark in the box “Not displaying conﬁrmation dialog for adding Network settings”, the projector memorizes current conﬁguration and this dialog is not displayed again. To display this dialog again, click Option icon in the “LiveViewer”...
Page 152 1. Connection to the network 1.5 Selecting the network connection method (continued) Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • To connect, click the [Yes]. Proceed to item 1.8 Conﬁrming the connection to your destination.
Page 153 1. Connection to the network 1.5 Selecting the network connection method (continued) (3) Conﬁ guring manually 18), you are required to enter the network After entering the Passcode ( conﬁ guration manually if you use a Subnet mask other than Class A, B or C. ( 23).
Page 154 1. Connection to the network 1.5 Selecting the network connection method (continued) Wired LAN 1) Enter the following information for the projector. Subnet mask *1: 255.255.255.128 (example) 2) Click the [Connect]. 3) The network connection will be established. Proceed to item 1.8 Conﬁrming the connection to your destination.
Page 155: Manual Conﬁguration
1. Connection to the network 1.6 Manual conﬁguration There are 3 options for the manual conﬁguration. below) • Proﬁle ( • History ( • Conﬁgure Network Settings Manually ( If you select Conﬁgure Network Settings Manually, proceed to item 1.7 Conﬁguring the network settings manually.
Page 156: History Connection
1. Connection to the network 1.6 Manual conﬁguration (continued) 1.6.2 History connection The “LiveViewer” can memory the network settings when connecting to the projector as a history record. After that, selecting a history record can quickly connect the network with the projector.
Page 157: Conﬁguring The Network Settings Manually
1. Connection to the network 1.7 Conﬁguring the network settings manually All setting for the network connection between the projector and computer is input manually. Select the [Conﬁgure Network Settings Manually]. The information to be input manually is different, depending on how you want to connect the projector and computer.
Page 158 1. Connection to the network 1.7 Conﬁ guring the network settings manually (continued) Wireless LAN 1) The setting on the access point. *1 Enter the following information. SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2: ********** (example) Mode: INFRASTRUCTURE 2) Click the [Next].
Page 159 1. Connection to the network 1.7 Conﬁguring the network settings manually (continued) Wired LAN 1) Enter the following information for the projector. *1 IP address : 192.168.1.10 (example) Subnet mask : 255.255.255.0 (example) 2) Click the [Connect]. 3) The network connection will be established. Proceed to item 1.8 Conﬁrming the connection to your destination.
Page 160 1. Connection to the network 1.7 Conﬁguring the network settings manually (continued) If you need to add a Network conﬁguration on your computer to connect to the projector. This dialog will be displayed when you need to add a Network conﬁguration on your computer to connect to the projector.
Page 161 1. Connection to the network 1.7 Conﬁguring the network settings manually (continued) If the entered IP address and projector's IP address are the same, a warning dialog shown to the right will be displayed. Click the [OK], and then enter a different IP address from the projector's one in the dialog for changing Network conﬁguration.
Page 162: Conﬁrming The Connection To Your Destination
1. Connection to the network 1.8 Conﬁrming the connection to your destination 1.8.1 Connection and transmission When the network connection is established, the “Connection to Projector successful” screen is displayed. Make sure that the right projector that you want to send your image to is selected, by checking the projector name and IP address shown in the screen.
Page 163 1. Connection to the network 1.8 Conﬁrming the connection to your destination (continued) A Slideshow is currently running on the projector that you are trying to display to. The projector you want to send your images to is in the Slideshow mode in the PC-LESS Presentation.
Page 164: Connection Error
1. Connection to the network 1.8 Conﬁrming the connection to your destination (continued) 1.8.2 Connection error When the connection to the projector could not be established, an error message, “Network Connection not established”, will come up. Click the [OK] then the “LiveViewer” main menu is displayed even though the network is not established.
Page 165: Proﬁle Data
1. Connection to the network 1.9 Proﬁle data 1.9.1 Outline of Proﬁle data The network setting to connect the projector and computer can be stored as a proﬁle data. Once the data is stored, all you need to do is to select the data to connect to the network.
Page 166: Editing Proﬁle Data
1. Connection to the network 1.9 Proﬁle data (continued) 1.9.3 Editing Proﬁle data If necessary, the proﬁle data can be edited on the Manual Conﬁguration screen. ( 1) Select the [Proﬁle], and select one of the data listed in the window. 2) Click the [Edit].
Page 167: Registering My Connection
1. Connection to the network 1.9 Proﬁle data (continued) 1.9.4 Registering My Connection One of the proﬁle data, which is often used, can be registered as the My Connection proﬁle data. Once the data is registered, all you need to do is to select the My Connection to connect to the network.
Page 168 1. Connection to the network 1.9 Proﬁle data (continued) Also, you can register a proﬁle data to My Connection, when the network connection is established. When it is established, the “Connection to Projector successful” screen is displayed. ( If you wish to use the current connection setting for My Connection, check in the box for the [Register this setting to My Connection].
Page 169: Network Presentation
2. Network Presentation 2. Network Presentation 2.1 Using the “LiveViewer” When you get the connection between your projector and computer, the “LiveViewer” main menu will be shown on the computer screen. On the main menu you can conﬁgure settings and operate functions to send your images to the projector.
Page 170 2. Network Presentation 2.1 Using the “LiveViewer” (continued) e Hold button The image on screen is temporally frozen. The last image before the button is clicked is remained on screen. You can revise the image data on your computer without showing it on the projector’s screen.
Page 171: Displaying The Status
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.2 Displaying the status 1) Indicator The indicator shows the following status. Indicator Status Note The network connection to the projector is Not connected not established yet. The network connection is established, but Hold the image transmissions on hold.
Page 172: Switching The Display Mode
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.3 Switching the display mode The “LiveViewer” has the Single PC mode and Multi PC mode. The modes can be switched on the main menu. 1) Click the button on the main menu. The buttons below are displayed.
Page 173: Option Menu
2. Network Presentation 2.1 Using the “LiveViewer” (continued) 2.1.4 Option menu Clicking the Option button displays the option menu on screen. q “Not displaying conﬁrmation dialog for adding Network settings” This setting allows you to choose to display or not the conﬁrmation dialog for 20, 29) when you connect your computer adding a Network conﬁguration ( to the projector.
Page 174 NOTE • Please check this box when you use Starboard Software with CP-AW2519N/CP-AW2519NM. The annotation layer may not display on the projector image when this option is OFF. • This function is available in Ver.4.3 or later.
Page 175: Starting The Network Presentation
2. Network Presentation 2.2 Starting the Network Presentation This chapter explains the Network Presentation feature with which you can project computer images transmitted through a network. The “LiveViewer” allows you to project images from one or multiple computers by connecting the projector to an existing network without using computer cables. This Network Presentation feature helps you to smoothly make your presentations and conduct conferences.
Page 176: Presenter Mode
2. Network Presentation 2.2 Starting the Network Presentation (continued) 2) Multi PC mode The projector screen is divided to 4 zones. The projector displays images in one zone sent by a computer, so that the projector can display images sent by up to 4 computers at the same time.
Page 177: Web Control
3. Web Control 3. Web Control You can adjust or control the projector via a network from a web browser on a computer that is connected to the same network. NOTE • Internet Explorer 6.0 or later is required. • If JavaScript is disabled in your web browser conﬁguration, you must enable JavaScript in order to use the projector web pages properly.
Page 178: Logon
3. Web Control 3.1 Logon To use the Web Control function, you need to logon with your user name and password. ( Refer to the following for conﬁguring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Display the logon window as shown on the right.
Page 179 3. Web Control 3.1 Logon (Continued) Below are the factory default settings for user name and password. User name Password Administrator <blank> If you logon successfully, the screen below will be displayed. Main menu 3) Click the desired operation or conﬁguration item on the main menu.
Page 180: Network Information
3. Web Control 3.2 Network Information Displays the projector’s current network conﬁguration settings. Item Description Projector Name Displays the projector name settings. DHCP Displays the DHCP conﬁguration settings. IP Address Displays the current IP address. Subnet Mask Displays the subnet mask. Default Gateway Displays the default gateway.
Page 181: Network Settings
3. Web Control 3.3 Network Settings Displays and conﬁgures network settings. Item Description IP Conﬁguration Conﬁgures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Conﬁgures the IP address when DHCP is disabled. Subnet Mask Conﬁgures the subnet mask when DHCP is disabled. Default Gateway Conﬁgures the default gateway when DHCP is disabled.
Page 182: Port Settings
3. Web Control 3.4 Port Settings Displays and conﬁgures communication port settings. Item Description Network Control Port1 Conﬁgures command control port 1 (Port:23). (Port:23) Port open Click the [Enable] check box to use port 23. Click the [Enable] check box when authentication is required Authentication for this port.
Page 183 3. Web Control 3.4 Port Settings (Continued) Item Description SNMP Port Conﬁgures the SNMP port. Port open Click the [Enable] check box to use SNMP. Conﬁgures the destination of the SNMP Trap in IP format. • The address allows not only IP address but also domain Trap address name if the valid DNS server is setup in the Network Settings.
Page 184: Mail Settings
3. Web Control 3.5 Mail Settings Displays and conﬁgures e-mail addressing settings. Item Description Click the [Enable] check box to use the e-mail function. Send Mail Conﬁgure the conditions for sending e-mail under the Alert Settings. Conﬁgures the address of the mail server in IP format. •...
Page 185: Alert Settings
3. Web Control 3.6 Alert Settings Displays and conﬁgures failure & alert settings. Item Description Cover Error The lamp cover has not been properly ﬁxed. Fan Error The cooling fan is not operating. The lamp does not light, and there is a possibility that interior Lamp Error portion has become heated.
Page 186 3. Web Control 3.6 Alert Settings (Continued) The Alert Items are shown below. Item Description Conﬁgures the time to alert. Alarm Time (Only Lamp Time Alarm and Filter Time Alarm.) SNMP Trap Click the [Enable] check box to enable SNMP Trap alerts. Click the [Enable] check box to enable e-mail alerts.
Page 187: Schedule Settings
3. Web Control 3.7 Schedule Settings Displays and conﬁgures schedule settings. Item Description Daily Conﬁgures the daily schedule. Sunday Conﬁgures the Sunday schedule. Monday Conﬁgures the Monday schedule. Tuesday Conﬁgures the Tuesday schedule. Wednesday Conﬁgures the Wednesday schedule. Thursday Conﬁgures the Thursday schedule. Friday Conﬁgures the Friday schedule.
Page 188 3. Web Control 3.7 Schedule Settings (Continued) The schedule settings are shown below. Item Description Schedule Click the [Enable] check box to enable the schedule. Conﬁgures the month and date. Date (Month/Day) This item appears only when Speciﬁc date (No. 1-5) is selected.
Page 189 3. Web Control 3.7 Schedule Settings (Continued) NOTE • After the projector is moved, check the date and time set for the projector before conﬁguring the schedules. Strong shock may make the date 59) get out of tune. and time settings ( •...
Page 190: Date/Time Settings
3. Web Control 3.8 Date/Time Settings Displays and conﬁgures the date and time settings. Item Description Current Date Conﬁgures the current date in year/month/day format. Current Time Conﬁgures the current time in hour:minute:second format. Click the [ON] check box to enable daylight savings time and Daylight Savings Time set the following items.
Page 191 3. Web Control 3.8 Date/Time Settings (Continued) Item Description Conﬁgures the time difference. Set the same time difference Time difference as the one set on your computer. If unsure, consult your IT manager. Click the [ON] check box to retrieve Date and Time SNTP information from the SNTP server and set the following items.
Page 192: Security Settings
3. Web Control 3.9 Security Settings Displays and conﬁgures passwords and other security settings. Item Description User Account Conﬁgures the user name and password. Conﬁgures the user name. User name The length of the text can be up to 32 alphanumeric characters.
Page 193: Projector Control
3. Web Control 3.10 Projector Control The items shown in the table below can be performed using the Projector Control menu. Select an item with the mouse. Most of the items have a submenu. Refer to the table below for details. NOTE •...
Page 194 3. Web Control 3.10 Projector Control (Continued) Item Description PICTURE BRIGHTNESS Adjusts the brightness setting. CONTRAST Adjusts the contrast setting. GAMMA Selects the gamma setting. COLOR TEMP Selects the color temperature setting. COLOR Adjusts the color setting. TINT Adjusts the tint setting. SHARPNESS Adjusts the sharpness setting.
Page 195 3. Web Control 3.10 Projector Control (Continued) Item Description SETUP D-ZOOM Adjusts the zoom. D-SHIFT V Adjusts the vertical picture position. D-SHIFT H Adjusts the horizontal picture position. PICT.POSIT.H Selects the horizontal picture position. KEYSTONE V Adjusts the vertical keystone distortion setting. KEYSTONE H Adjusts the horizontal keystone distortion setting.
Page 196 3. Web Control 3.10 Projector Control (Continued) Item Description AUDIO VOLUME Adjusts the volume setting. SPEAKER Turns the built-in speaker on/off. AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN1 input port. COMPUTER IN1 AUDIO SOURCE - Assigns the AUDIO SOURCE - COMPUTER IN2 input port. COMPUTER IN2 AUDIO SOURCE - Assigns the AUDIO SOURCE - LAN input port.
Page 197 3. Web Control 3.10 Projector Control (Continued) Item Description OPTION AUTO SEARCH Turns the automatic signal search function on/off. DIRECT POWER ON Turns the direct power on function on/off. Conﬁgures the timer to shut off the projector when no signal AUTO POWER OFF is detected.
Page 198 3. Web Control 3.10 Projector Control (Continued) The items shown in the table below can be performed using the Projector Control menu. Click the [Quit Presenter Mode]. Item Description SERVICE Quit Presenter Mode Quit compulsorily from the Presenter mode.
Page 199: Remote Control
3. Web Control 3.11 Remote Control You can use your Web browser to control the projector. • Do not attempt to control the projector with the projector’s remote control and via your Web browser at the same time. It may cause some operational errors in the projector.
Page 200: Projector Status
3. Web Control 3.12 Projector Status Displays and conﬁgures the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp. Filter Time Displays the usage time for the current ﬁlter. Power Status Displays the current power status.
Page 201: Network Restart
3. Web Control 3.13 Network Restart Restarts the projector’s network connection. Item Description Restarts the projector’s network connection in order to Restart activate new conﬁguration settings. NOTE • Restarting requires you to re-log on in order to further control or conﬁgure the projector via a web browser.
Page 202: My Image Function
MY IMAGE transmission requires an exclusive application for your computer. Use the application to transfer the image data. It can be downloaded from the Hitachi web site (http://www.hitachi-america.us/ digitalmedia or http://www.hitachidigitalmedia.com). Refer to the manual for the application for instructions.
Page 203 4. My Image Function 4. My Image Function (Continued) Conﬁgure the following items from a web browser when MY IMAGE function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 204: Messeger Function
Messenger function requires an exclusive application for your computer. To edit, transfer and display the text data, use the application. You can download it from the Hitachi web site (http://www.hitachi-america.us/digitalmedia or http://www. hitachidigitalmedia.com). Refer to the manual for the application for the details of Messenger function and instructions of the application.
Page 205 5. Messenger Function 5. Messenger Function (Continued) Conﬁgure the following items from a web browser when Messenger function is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 206: Network Bridge Function
6. Network Bridge Function 6. Network Bridge Function This projector is equipped with the NETWORK BRIDGE function to perform mutual conversion of a network protocol and a serial interface. Using the NETWORK BRIDGE function, a computer that is connected with this projector by Ethernet communication can control an external device that is connected with this projector by RS-232C communication as a network terminal.
Page 207: Communication Setup
6. Network Bridge Function 6.2 Communication setup To conﬁgure the setup of the communication using NETWORK BRIDGE for the projector, use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu. OPTION menu –...
Page 208: Transmission Method
6. Network Bridge Function 6.4 Transmission method The transmission method can be selected from the menus, only when the NETWORK BRIDGE is selected for the COMMUNICATION TYPE. OPTION menu – SERVICE – COMMUNICATION in the User’s Manual – Operating Guide) HALF-DUPLEX FULL-DUPLEX 6.4.1 HALF-DUPLEX...
Page 209: Full-Duplex
6. Network Bridge Function 6.4 Transmission method (Continued) NOTE • With using the HALF-DUPLEX method, the projector can send out 254 byte data as maximum at once. • If it is not required to monitor the response data from an external device and the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data from the computer and send it out to an external device continuously.
Page 210: Other Functions
7. Other Functions 7. Other Functions 7.1 E-mail Alerts The projector can automatically send an alert message to the speciﬁed e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error. NOTE • Up to ﬁve e-mail addresses can be speciﬁed. •...
Page 211 7. Other Functions 7.1 E-mail Alerts (Continued) 5) Click the [Alert Settings] on the main menu to conﬁgure the E-mail Alerts settings. 54) for 6) Select and conﬁgure each alert item. Refer to item 3.6 Alert Setting ( further information. 7) Click the [Apply] button to save the settings.
Page 212: Projector Management Using Snmp
7. Other Functions 7.2 Projector Management using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.
Page 213: Event Scheduling
7. Other Functions 7.3 Event Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector. NOTE • You can schedule the following control events: Power, Input Source, My Image, Messenger, Slideshow. ( •...
Page 214 7. Other Functions 7.3 Event Scheduling(Continued) Schedule Settings ( Schedule settings can be conﬁgured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 215 7. Other Functions 7.3 Event Scheduling(Continued) Date/Time Settings ( The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter “http://192.168.1.10/” into the address bar of the web browser. 2) Enter your user name and password, and then click the [OK].
Page 216: Command Control Via The Network
7. Other Functions 7.4 Command Control via the Network You can conﬁgure and control the projector via the network using RS-232C commands. Communication Port The following two ports are assigned for the command control. TCP #23 (Network Control Port1 (Port: 23)) TCP #9715 (Network Control Port2 (Port: 9715)) NOTE •...
Page 217 7. Other Functions 7.4 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. 7) Click the [Security Settings] on the main menu. 8) Click the [Network Control] and enter the desired authentication password. * See NOTE.
Page 218 7. Other Functions 7.4 Command Control via the Network (Continued) Command Format Command formats differ among the different communication ports. ● TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. ( “RS-232C Communication”...
Page 219 7. Other Functions 7.4 Command Control via the Network (Continued) Reply Data format The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Connection Reply 0x06...
Page 220 7. Other Functions 7.4 Command Control via the Network (Continued) Automatic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. Authentication The projector does not accept commands without authentication success when authentication is enabled.
Page 221: Troubleshooting
8. Troubleshooting 8. Troubleshooting Reference Problem Likely Cause Things to Check Page Number The projector is not turned Is the projector’s lamp on? No image The projector’s input source Is the projector switched to *22, *23 isn’t switched to LAN. LAN? Check the network configurations of the...
Page 222 8. Troubleshooting 8. Troubleshooting (Continued) Reference Problem Likely Cause Things to Check Page Number The projector isn’t capable Switching the priority to of relaying dynamic images ‘Transmission Speed’ under The projected such as PowerPoint ® the options menu may help image is rather animation at full speed.
Page 223 8. Troubleshooting 8. Troubleshooting (Continued) Reference Problem Likely Cause Things to Check Page Number Others Communication between - Information from the the projector and computer projector to computer is is not working well. Try “RESTART” in not correct or completed SERVICE menu under the - The projector does not NETWORK Functions of...
Page 224: Warranty And After-Sales Service
9. Warranty and after-sales service 9. Warranty and after-sales service If a problem occurs with the equipment, please read 8. Troubleshooting ( section ﬁrst and review all suggested check points. After that, please contact your dealer or service company, if you still have the problem. They will tell you what warranty condition is applied.
Page 225 Projector CP-AW2519N (Type nos. CP-AW2519N, CP-AW2519NM) User's Manual (detailed) Operating Guide – Technical Example of computer signal Resolution (H x V) H. frequency (kHz) V. frequency (Hz) Rating Signal mode 720 x 400 37.9 85.0 VESA TEXT 640 x 480 31.5...
Page 226 Initial set signals Initial set signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the IMAGE menu. Back porch (B) Front porch (D) Back porch (b)
Page 227: Monitor Out
Connection to the ports Connection to the ports NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input ports of the projector are recessed. ►Only the signal that is input from the COMPUTER IN1 or IN2 can be output from the MONITOR OUT port.
Page 228 Connection to the ports (continued) COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 MONITOR OUT CONTROL AUDIO IN2 VIDEO S-VIDEO Mini DIN 4pin jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL(60Hz) Signal Color signal 0.286Vp-p (NTSC, burst), 75Ω...
Page 229 Connection to the ports (continued) COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO IN1 AUDIO IN3 AUDIO OUT MONITOR OUT CONTROL AUDIO IN2 VIDEO HDMI 10 12 14 16 18 • Type :Digital audio/video connector 11 13 15 17 19 •...
Page 230 Connection to the ports (continued) COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO IN1 AUDIO IN3 AUDIO OUT MONITOR OUT CONTROL AUDIO IN2 VIDEO USB TYPE A USB TYPE B USB A type jack USB B type jack Signal Signal...
Page 231 Connection to the ports (continued) To input component video signal to COMPUTER IN ports D-sub plug COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B RCA plugs TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 RCA connectors MONITOR OUT CONTROL COMPONENT VIDEO OUT AUDIO IN2...
Page 232 RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication / Network 17). command table ( Connection Turn off the projector and the computer.
Page 233: Communication Settings
RS-232C Communication (continued) Communication settings 1. Protocol 19200bps,8N1 2. Command format ("h" shows hexadecimal) Byte Number Command Header Data Header Data Setting Action Type code size ﬂag code Packet Action <SET>Change setting to desired value [(cL)(cH)] (aL) (aH) 01h 00h (bL) (bH) (cL) (cH) by [(bL)(bH)].
Page 234 RS-232C Communication (continued) 3. Response code / Error code ("h" shows hexadecimal) (1) ACK reply : 06h When the projector receives the Set, Increment, Decrement or Execute command correctly, the projector changes the setting data for the speciﬁed item by [Type], and it returns the code. (2) NAK reply : 15h When the projector cannot understand the received command, the projector returns the error code.
Page 235 Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS- 232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network 17).
Page 236 Command Control via the Network (continued) Communicaion Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Conﬁgure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
Page 237: Command Control Settings
Command Control via the Network (continued) Command control settings [TCP #23] 1. Command format Same as RS-232C communication, refer to RS-232C Communicaton command format. 2. Response code / Error code ("h" shows hexadecimal) Four of the response / error code used for TCP#23 are the same as RS-232C Communication (1)~(4).
Page 238 Command Control via the Network (continued) 2. Response code / Error code ("h" shows hexadecimal) The connection ID is attached for the TCP#23's response / error codes are used. The connection ID is same as the sending command format. (××h : connection ID) (1) ACK reply : 06h + ××h (2) NAK reply : 15h + ××h (3) Error reply : 1Ch + 0000h + ××h...
Page 239 Network Bridge Communication Network Bridge Communication This projector is equipped with NETWORK BRIDGE function. When the projector connects to the computer by LAN communicaton, an external device that is connected with this projector by RS-232C communication can be controlled from the computer as a network terminal. For details, see the 6.
Page 240 Network Bridge Communication (continued) Communication settings For communication setting, use the OPTION - SERVICE - COMMUNICATION menu. ( OPTION menu - SERVICE - COMMUNICATION in the User's Manual - Operating Guide) Item Condition BAUD RATE 4800bps / 9600bps / 19200bps / 38400bps Data length 8 bit (ﬁxed) PARITY...
Page 241 RS-232C Communication / Network command table RS-232C Communication / Network command table Command Data Names Operation Type Header Action Type Setting code Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00...
Page 242 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code CONTRAST Execute BE EF 06 00 A4 D2 06 00 01 70 00 00 Reset 1 DEFAULT BE EF 06 00 07 E9 01 00 A1 30 20 00...
Page 243 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 80 FE 02 00 96 30 00 00 User Gamma Increment BE EF 06 00 E6 FE 04 00 96 30 00 00 Point 7...
Page 244 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 BC F4 02 00 B7 30 00 00 COLOR TEMP Increment BE EF 06 00 DA F4 04 00 B7 30 00 00 OFFSET B...
Page 245 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 F1 82 02 00 01 21 00 00 H POSITION Increment BE EF 06 00 97 82 04 00 01 21 00 00 Decrement...
Page 246 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code AUTO BE EF 06 00 86 D8 01 00 22 20 00 00 NORMAL BE EF 06 00 16 D9 01 00 22 20 01 00 HDMI RANGE ENHANCED...
Page 247 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 31 89 02 00 21 21 00 00 PERFECT FIT Increment BE EF 06 00 57 89 04 00 21 21 00 00 Left Top -H...
Page 248 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code NORMAL BE EF 06 00 3B 23 01 00 00 33 00 00 ECO MODE BE EF 06 00 AB 22 01 00 00 33 01 00 BE EF...
Page 249 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 75 CD 02 00 62 20 00 00 VOLUME - Increment BE EF 06 00 13 CD 04 00 62 20 00 00 S-VIDEO...
Page 250 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code BE EF 06 00 AE DE 01 00 3C 20 00 00 AUDIO IN1 BE EF 06 00 3E DF 01 00 3C 20 01 00 AUDIO SOURCE USB...
Page 251 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code POLSKI BE EF 06 00 97 D7 01 00 05 30 0E 00 TÜRKÇE BE EF 06 00 07 D6 01 00 05 30 0F 00 DANSK BE EF...
Page 252 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code TEST PATTERN BE EF 06 00 43 D9 01 00 22 30 00 00 DOT-LINE1 BE EF 06 00 D3 D8 01 00 22 30 01 00 DOT-LINE2...
Page 253 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 3A 33 01 00 00 36 00 00 COMPUTER IN2 BE EF 06 00 FA 31 01 00 00 36 04 00 BE EF...
Page 254 RS-232C Communication / Network command table (continued) Command Data Names Operation Type Header Action Type Setting code COMPUTER IN1 BE EF 06 00 FA 38 01 00 20 36 00 00 COMPUTER IN2 BE EF 06 00 3A 3A 01 00 20 36 04 00 BE EF...
Page 255 PJLink command PJLink command Commands Control Description Parameter or Response 0 = Standby POWR Power Contorol 1 = Power On 0 = Standby POWR ? Power Status inquiry 1 = Power On 2 = Cool Down 11 = COMPUTER IN 1 12 = COMPUTER IN 2 22 = S-VIDEO 23 = VIDEO...
Page 256 NAME" of "NETWORK" Manufucturer's Name INF1 ? HITACHI inquiry INF2 ? Model Name inquiry CP-AW2519N Responds with the factory information and so INFO ? Other Information inquiry CLSS ? Class Information inquiry 1 NOTE • The password used in PJLink is the same as the password set in the Web Brouwser Comtrol.
Page 257 Projector CP-AW2519N (Type nos. CP-AW2519N, CP-AW2519NM) User's Manual (concise) Thank you for purchasing this projector. Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this 19) to read the manuals in the CD.
Page 258: First Of All
First of all Entries and graphical symbols explanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. WARNING This entry warns of a risk of serious personal injury or even death. CAUTION This entry warns of a risk of personal injury or physical damage.
Page 259: Regulatory Notices
Regulatory notices About Electro-Magnetic Interference This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
Page 260: About Waste Electrical And Electronic Equipment
• About the software applications, read the manuals that are provided in the disc of the software. • StarBoard Software complies with the conditions provided by Hitachi Solutions, Ltd. Contact your local dealer or service company for inquiry.
Page 261: Arrangement
Arrangement Refer to table T-1 and ﬁgures F-1 and F-2 at the end of this manual to determine the screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280 x 800 Screen size (diagonal) Projection distance (±8%) Screen...
Page 262: Connecting With Your Devices
Connecting with your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Refer to ﬁgures F-3 to F-6 at the back of this manual.
Page 263: Connecting Power Supply
Connecting with your devices (continued) NOTE • If a loud feedback noise is produced from the speaker, move the microphone away from the speaker. • This projector doesn't support plug-in power for the microphone. • The COMPUTER IN1/2 port can support a component signal also. The speciﬁc adapter or the speciﬁc cable is required for a component video input to the projector.
Page 264: Using The Cable Cover
Using the cable cover Utilize the cable cover as the guard and blind for the connecting parts. Connect the signal cables and the power cord to the projector ﬁrst. Combine parts as shown in ﬁgure, and assemble the cable cover. Insert the three knobs on the cable cover into the three holes on the projector as shown in the ﬁgure.
Page 265: Turning On The Power
Turning on the power STANDBY/ON button POWER indicator Make sure that the power cord is ﬁrmly and correctly connected to the projector and the outlet. Make sure that the POWER indicator is steady orange. Conﬁrm that there is nothing that the MY SOURCE/ VIDEO COMPUTER...
Page 266: Adjusting The Projector's Elevator
Adjusting the projector's elevator The projector has Front foot for inclinations and Rear foot for horizontals. Spacers on the each elevator foot are installed at the time of shipment, and projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted to make more precise adjustments.
Page 267 Focusing ASPECT button Use the FOCUS + and FOCUS – buttons on MY SOURCE/ the projector or remote control to adjust the VIDEO COMPUTER DOC.CAMERA VOLUME+/- button ASPECT AUTO SEARCH BLANK screen focus. MAGNIFY PAGE VOLUME FREEZE DOWN Selecting an aspect ratio KEYSTONE button MY BUTTON KEYSTONE...
Page 268: Turning Off The Power
Turning off the power STANDBY/ON button Press the STANDBY/ON button on the POWER indicator projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. Conﬁrm that there is nothing that the lens door hits while closing. Press the STANDBY/ON button again while the MY SOURCE/ VIDEO...
Page 269: Replacing The Lamp
Replacing the lamp A lamp has ﬁnite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended.
Page 270 Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Page 271: Cleaning And Replacing The Air Filter
Cleaning and replacing the air ﬁlter The air ﬁlter has two kinds of ﬁlters inside. Please check and clean the air ﬁlter periodically. When the indicators or a message prompts you to clean the air ﬁlter, comply with it as soon as possible.
Page 272: Preparing For The Remote Control
Align and insert the two AA batteries HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No. LR6 or R6P according to their plus and minus terminals as indicated in the remote control. Replace the battery cover in the direction of the arrow and snap it back into place.
Page 273: Replacing The Internal Clock Battery
This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL or HITACHI MAXELL ENERGY, part number CR2032 or CR2032H. Turn the projector off, and unplug the Battery Cover power cord.
Page 274: Caring For The Mirror And Lens
Caring for the mirror and lens If the projection mirror or lens is ﬂawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the mirror and lens, being cautious of handling. Turn the projector off and unplug the power cord from the power outlet.
Page 275: Using The Cd Manual
Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System requirements The system for using the CD-ROM requires the following. ®...
Page 276: Speciﬁcations
Mounting accessary: HAS-AW100 (Bracket for ceiling mount) HAS-203L (Fixing adaptor for low ceilings) HAS-P100 (Fixing adaptor for high ceilings) Optional parts HAS-K250 (Wall mount unit : only for CP-AW2519N) Interactive pen: I-PEN2 Tabletop use kit: TT-251 Laser remote control: RC-R008...
Page 277: Troubleshooting - Warranty And After-Service
Blu-ray Disc Association. ® • StarBoard is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries. • © 2011 Luidia, Inc. All rights reserved. eBeam, the eBeam logo and eBeam Enabled are trademarks or registered trademarks of Luidia, Inc.
Page 278 • On a horizontal surface • Mounted on the wall or ceiling Projection distance Screen height Screen size (diagonal) inch inch inch inch type(inch) 0.120 0.426 16.8 0.295 11.6 1.102 43.4 0.188 0.494 19.5 0.332 13.1 1.274 50.2 0.256 10.1 0.562 22.1 0.369...
Page 279 Access point Computer VCR/DVD/Blu-ray Disc player COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO OUT AUDIO IN1 AUDIO IN3 MONITOR OUT CONTROL VIDEO AUDIO IN2 Microphone Speakers Monitor system (with an ampliﬁ er) RGB IN USB storage device COMPUTER IN2...
Page 280 Computer Access point RS-232C COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A S-VIDEO AUDIO IN1 AUDIO IN3 AUDIO OUT MONITOR OUT CONTROL AUDIO IN2 VIDEO Computer HDMI DISPLAY HDMI COMPUTER IN2 COMPUTER IN1 HDMI USB TYPE B TYPE A DC5V 0.5A...
Page 281 [unit: mm] MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME FREEZE DOWN MY BUTTON KEYSTONE MUTE FOCUS D-ZOOM POSITION MENU ENTER RESET (10) * (11)
Page 282 NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in this manual. • The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. REMARQUE •...
Page 283 Email: Service.germany@hitachi-eu.com Tel: +60 -3-8911-2670 ► http://www.hitachiconsumer.com.my Hitachi Europe S.A. 364, Kifissias Ave. & 1, Delfon Str. Hitachi Home Electronics Asia (S) Pte. Ltd. 152 33 Chalandri 438A Alexandra Road #01-01/02/03 Athens GREECE Alexandra Technopark, 119967 SINGAPORE Tel: 210 6837200 Tel: +65 -6536-2520 Email: tech.assist@hitachi-eu.com...

This manual is also suitable for:

Bz-1

Hitachi CP-AW2519N Manual

Table of Contents

Connection to the Network/Network Presentation

1 Connection to the Network

2 Network Presentation

3 Web Control

4 My Image Function

5 Messeger Function

6 Network Bridge Function

7 Other Functions

8 Troubleshooting

9 Warranty and After-Sales Service

Cp-Aw2519N

Quick Links

Chapters

Troubleshooting

Related Manuals for Hitachi CP-AW2519N

Summary of Contents for Hitachi CP-AW2519N

This manual is also suitable for:

Table of Contents