Table of Contents
Advertisement
Light Functions:
The unit has four LED indicators, located on the side of the unit. The following
lists the functions of these lights:
1 - ON / OFF
Green solid – Indicates power ON
2 – DRYING
Blue flashing – Indicates drying selected (compressor has not started)
Blue solid – Indicates drying ON (compressor has started)
3 – DEFROST
Yellow flashing (Approximately every 5 seconds) – Defrost cycle active
Yellow solid – Defrost in progress
4 – Alarm
Indicates the pump is running, colour can be Flashing Yellow or Red
Initially flashes yellow for a minimum time of 5 seconds. If after 10 seconds
the pump is still running the controller assumes a fault / restriction and turns to
solid Red.
If the fault clears and the float returns to its normal position, the pump will stop
and the LED extinguishes
If, after carrying out the above procedures, the appliance does not
appear to function properly, refer to the Trouble Shooting section, which
WM150 OWNERS MANUAL
1
2
3
follows, or contact EIPL.
Drawing No. :- TPC551
Issue
Date
4
:- 1
:- 19/05/21
Page 6 of 16
Advertisement
Table of Contents
