Basic Operation Of Freezers - Turbo Air PRO-89R-RI-N Installation And Operation Manual

BASIC OPERATION
FREEZERS
1. When the freezer is plugged in, the Display panel will light up and make a
beep sound. The compressor will then begin to run.
2. The default temperature setting is 1°F.
3. The compressor is automatically cycled by the electronic controller.
4. The Defrost cycle is automatically controlled by the electronic controller.
5. The interior light is activated when the door is opened.
6. Evaporator fan motor(s) will run after all doors are completely closed.
7. Good Air Flow in freezer unit is critical.
Be careful to load product so that it neither presses against the back wall, nor
reaches within four inches from inside ceiling.
PRO-15F-N PRO-15-2F-N
PRO-26F-N PRO-26-2F-N
PRO-50F-N PRO-50-4F-N
PRO-77F-N PRO-77-6F-N
17
PRO-26F-RI-N
PRO-50F-RI-N