Table of Contents
Advertisement
INSTALLATION
RAMP INSTALLATION FOR ROLL-IN MODELS
• Roll-In Cabinets placed on the ground require flat and level ground to be set. Also,
to comply with National Sanitation Foundation standards, sealant should be applied
around the perimeter of the models' base.
• Wear safe gloves when carrying the ramps to prevent possible injuries.
Step 1
Place the frontal flange of the Ramp between the Support Ramp and Support Ramp (B).
If the flange gets placed behind the Support Ramp, the door will not close.
Step 2
Center the ramp respect to the Roll-In Cabinet. Then the installation process is
completed.
12
Advertisement
Table of Contents
