Table of Contents
Advertisement
b. Stick the front antenna to the front panel as shown. Then, insert the front-antenna cable into the hole
in the front panel.
Figure 99. Installing the front Wi-Fi antenna
c. Press the release tab and pivot the drive bay assembly to open it. See "Preparing your computer" on
page 92.
d. Connect the front-antenna cable to the Wi-Fi card and install the Wi-Fi card shield. See "Wi-Fi card"
on page 140.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 154.
Rear Wi-Fi antenna
To remove or install the rear Wi-Fi antenna, do the following:
1. Prepare your computer. See "Preparing your computer" on page 92.
2. To remove the rear Wi-Fi antenna, do the following:
a. Locate the rear Wi-Fi antenna. See "Major FRUs and CRUs" on page 34.
b. Straighten the rear Wi-Fi antenna so that it can be more easily twisted.
146
P330 Hardware Maintenance Manual
Advertisement
Table of Contents
