d. Flex the sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Note: Do not touch the contact edge
Figure 59. Removing the 2.5-inch storage drive from the bracket
4. To install the storage drive in the storage drive cage, do the following:
a. To install a new 2.5-inch storage drive into the bracket, flex the bracket and align the four pins on the
bracket with the corresponding holes in the storage drive.
Note: Do not touch the contact edge
Figure 60. Installing the 2.5-inch storage drive into the bracket
124
P330 Hardware Maintenance Manual
a
on the storage drive.
a
on the storage drive.