Table of Contents
Advertisement
b. Slide the new storage drive into the storage drive cage until it snaps into position.
Figure 61. Installing the 2.5-inch storage drive into the storage drive cage
c. Align the four holes on the rear of the storage drive cage with the corresponding hooks in the drive
bay assembly. Then slide the storage drive cage downward until it snaps into position. Install the
screw to secure the storage drive cage.
Figure 62. Installing the storage drive cage
d. Connect the signal cable and the power cable to the new storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 154.
.
Chapter 9
Hardware removal and installation
125
Advertisement
Table of Contents
