Hussmann VR1-D User Manual page 12

Installation (cont'd)
STEP 4. Apply liberal bead of case joint sealant
(Silicone) to first case. Sealant area is shown in
illustration. Apply heavy amount to cover entire
shaded area. (pg12)
STEP 5. Slide second case up to first case
snugly. Then level second case to the first case
so glass front, bumper and top are flush.
STEP 6. To compress butyl at joint, use two
Jurgenson wood clamps. Make sure case is level
from front to back and side to side on inside
bulkheads at joint.
STEP 7. Attach sections together.
STEP 8. Apply bead of butyl to top of bulk heads
and slide on stainless steel bulkhead cap as pic-
tured below. Also apply silicone to seam
between joints.
BULK HEAD
JOINT CAPS
12