ADVATEK LIGHTING PixLite T8-S Mk3 Quick Start Manual

Hide thumbs Also See for PixLite T8-S Mk3:

PixLite T8-S Mk3 Quick Start Guide

1 - Physical Connections

In order to connect to the PixLite T8-S Mk3, the IEC Power Input must be connected to

a source of mains power (100-240V AC, 50/60Hz). An Ethernet cable should also be

connected to either of the Ethernet Ports, allowing connection to a local network, or

directly to a PC.

Figure 1: Connection Points

- 1 -

www.advateklighting.com

PixLite T8-S Mk3 Quick Start Guide V20230823

Table of Contents

Do you have a question about the PixLite T8-S Mk3 and is the answer not in the manual?

Page 1 PixLite T8-S Mk3 Quick Start Guide 1 - Physical Connections In order to connect to the PixLite T8-S Mk3, the IEC Power Input must be connected to a source of mains power (100-240V AC, 50/60Hz). An Ethernet cable should also be connected to either of the Ethernet Ports, allowing connection to a local network, or directly to a PC.
Page 2 Advatek Assistant 3. 2.2 - Advatek Assistant 3 The easiest method for connecting to the PixLite T8-S Mk3 is by launching Advatek Assistant 3 to discover the device. Advatek Assistant 3 can be downloaded and installed, using the URL below: www.advateklighting.com/advatek-assistant-3...
Page 3 5 - Warranty Registration For your complete peace of mind, this PixLite T8-S Mk3 comes with an industry leading extended warranty period of 5 years, subject to registration. Please register your Advatek PixLite® Mk3 product using the link below.