Setting The Spray Pattern You Require When Working With The Spray Attachment - WAGNER 2361556 Operating Instructions Manual

W 950 Flexio W 950 Flexio
•
Attach the Click&Paint adapter (Fig. 18, 2) with the bayonet coupling to the thinner end
of the air hose (1).
•
Insert the other end of the adapter into the gun handle (3).
•
Set the multifunction switch (fig. 19, A) to "ON".

1
21. Setting the spray pattern you require when working
with the spray attachment
WARNING! Danger of injury! Never pull the trigger guard while adjusting
the air cap.
With the union nut (fig. 20, 1) slightly unscrewed, turn the air cap (2) to the desired
spraysetting position (arrow). Then tighten the union nut.
Fig. 21 A = vertical flat jet Fig. 21 A =
Fig. 21 B = Fig. 21 B = horizontal flat jet
Fig. 21 C = circular jet Fig. 21 C =

3
2
for horizontal surfaces

for vertical surfaces

for corners, edges and hard-to-reach surfaces

1
2

A
EN
51 51